Operation Manual

Maintenance Mode
You can change the language or unit used on the
display or return all the setting values to their factory
default.
A
Turn off the printer by pressing the button.
B
Press both the button and the
button at the same time to turn on the printer.
Hold down both buttons until MAINTENANCE
MODE is displayed on the LCD panel.
Refer to the "Maintenance mode list" on the
right for details.
The setting procedures are the same as those
for the Menu mode.
See “Using the Menu mode” on page 15
C
To exit the Maintenance mode, press the
button to turn off the printer.
Maintenance mode list
* Default settings
Item Parameter Explanation
LANGUAGE JAPANESE You can select the
language to be
displayed on the
LCD panel.
ENGLISH *
FRENCH
ITALIAN
GERMAN
PORTUGUE
SPANISH
DUTCH
KOREAN
CHINESE
Item Parameter Explanation
LENGTH UNITS METRIC You can select a unit
of measurement to
use to display length.
FEET/INCH *
TEMPERATURE
UNITS
°C * You can select the
unit of temperature
displayed on the
LCD panel.
F
ROLL PAPER
TENSION
1 When you set EXTRA
HIGH to the SET
ROLL PAPER
TENSION setting in
the CUSTOM PAPER
SETUP menu of the
PAPER SETUP menu
in the Menu mode,
you can change the
value of Roll Paper
Tension on a scale of
one to five. When
you set the value
larger, the tension is
stronger.
2
3 *
4
5
SS CLEANING EXECUTE You can perform
ultrasonic head
cleaning.
DEFAULT
PANEL
EXECUTE You can set all
setting values you
made in the Menu
mode to their
factory set value.
AUTO
CLEANING
TIMES
1 * You can set the
number of times
that the printer
performs cleaning
when it performs a
nozzle check and
detects missing dots.
2
3
CUSTOM 0 - 255 You can make
custom settings. You
do not use this
normally.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
The Control Panel
27