Operation Manual
Tilt the front basket until parallel to the floor
when ejecting your prints.
Note:
When printing on Enhanced Matte Paper, you can
stack plural prints on the front basket by tilting it until
parallel to the floor. The quality of the prints may not
be assured, including scratches or dirty appearing.
Storing the paper basket
If the paper basket is not used, bring the front basket
up to the vertical position. This section explains how
to switch the status from feeding paper backward
status to storing paper basket.
A
For Epson Stylus Pro 9700/9710, bring the rear
basket up to the vertical position.
B
Bring the paper guides to the horizontal position.
C
Remove the hook-and-loop fastener straps, and
refasten it downward. Then bring the front
paper basket up to the vertical position.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
Paper Handling
43