Operation Manual

Control box
1. Sensor light
Displays the status of the Auto Take-up Reel Unit.
Light Status
On It is ready to use.
Flashing rapidly It is operating.
Flashing slowly It is in the power-saving
mode.
Long interval of flashing It has an error.
Off It is off.
2. Auto switch
It automatically winds the roll paper after printing.
Item Description
Backward It automatically winds the roll paper
with printed surface inside.
Forward It automatically winds the roll paper
with printed surface outside.
Off Do not rewind the roll paper.
3. Manual switch
It manually winds the roll paper after printing. This
mode becomes available when the Auto switch is Off.
Item Description
Backward It winds the roll paper with printed
surface inside. It becomes faster by
pressing this button for 3 seconds.
Forward It winds the roll paper with printed
surface outside. It becomes faster by
pressing this button for 3 seconds.
Winding paper forward
A
Turn off the Auto switch of the Auto Take-up
Reel Unit and plug the power cord into an
outlet, and make sure the sensor light is on.
B
Turn on the printer by pressing the button.
C
Make sure the Auto Take-up Reel Unit icon is
displayed on the LCD panel.
If the icon is not displayed, make sure the Auto
Take-up Reel Unit is connected properly and
the power is on.
D
Set the roll paper.
See “Loading roll paper” on page 29
E
Press the button to select Roll Auto Cut Off
or Roll Auto Cut On .
F
Press the button to feed the roll paper.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide
Paper Handling
45