User’s Guide NPD4075-00 EN
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Contents Contents For cut sheet media. . . . . . . . . . . . . . . . . . . . . Using the paper basket and paper guides. . . . . Using Auto Take-up Reel Unit (For Epson Stylus Pro 9700/9710 only). . . . . . . . . . . . . . . Printable area. . . . . . . . . . . . . . . . . . . . . . . . . Copyrights and Trademarks Safety Instructions Important Safety Instructions. . . . . . . . . . . . . . . . Warning, Cautions, and Notes. . . . . . . . . . . . . .
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Contents Cleaning the Printer. . . . . . . . . . . . . . . . . . . . . . Cleaning outside of the printer. . . . . . . . . . . . . Cleaning inside of the printer. . . . . . . . . . . . . Keeping the Printer. . . . . . . . . . . . . . . . . . . . . . . If you do not use your printer for a long time ................................... If you have not used your printer for more than six months. . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Contents Printing with Layout Manager. . . . . . . . . . . . . 158 Using Color Management. . . . . . . . . . . . . . . . . . 159 Color management by Driver ICM (Windows only). . . . . . . . . . . . . . . . . . . . . . . 160 Color management by Host ICM (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Color management by ColorSync (Mac OS X) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Safety Instructions When choosing a place for this product Safety Instructions ❏ Place this product on a flat, stable surface that is larger than this product. This product will not operate properly if it is tilted or at an angle. Important Safety Instructions ❏ Avoid places subject to rapid changes in temperature and humidity. Also keep it away from direct sunlight, strong light, or heat sources.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Safety Instructions ❏ If you use an extension cord with this product, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating. When using this product ❏ Do not put your hand inside this product or touch the ink cartridges during printing.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Safety Instructions ❏ If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust, and store it in the same environment as this product. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink supply port or surrounding area.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Introduction Large-capacity (350 or 700 ml) ink cartridge As well as the 150 ml ink cartridge, Epson provides large-capacity (350 or 700 ml) ink cartridges for this printer that realize the high productivity required for professional work. Introduction Features Roll paper remaining The remaining amount of the roll paper is displayed on the LCD panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Introduction Printer Parts Rear section Front section 1. Maintenance tanks The tank where the waste ink goes into. There are two maintenance tanks on both sides of Epson Stylus Pro 9700/9710. There is one maintenance tank on the right side of Epson Stylus Pro 7700/7710. 1. Adapter holder Fix the roll paper when setting the roll paper. 2. USB interface connector Connects the computer and printer with a USB interface cable. 2.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel 5. Paper Source button ( ) ❏ Selects a paper source and roll paper cut method. The icon changes by pressing this button. However, you cannot change the paper source icon to Sheet when you set the paper while REMAINING PAPER SETUP is set to ON. When you print from the printer driver, the settings you make on the printer driver have priority over the settings you make on the printer’s control panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel 7. Menu button ( ) ❏ Enters the Menu mode when pressed in the READY state. See “Menu Mode” on page 15 Lights ❏ Enters the PRINTER STATUS menu if pressed during printing. See “PRINTER STATUS ” on page 23 ❏ When pressed in the Menu mode, a desired menu can be selected. 8. OK button ( ) ❏ Sets the selected parameter in the selected item in the Menu mode. Executes the item if the selected item is for execution only.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel 3. Platen Gap icon/Paper Number Normally, displays the Platen Gap setting. See “PRINTER SETUP” on page 20 Display Icon Explanation None STANDARD NARROW WIDE WIDER 1. Messages Displays the printer status, operation, and error messages. See “Error Messages on the LCD Panel” on page 87 See “Details of Menu mode” on page 20 WIDEST When you select paper number (1 to 10) for CUSTOM PAPER, the number you selected appears.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel ❏ Ink remaining 5. Roll Paper Counter icon Displays the remaining amount of roll paper. When you make the following settings in ROLL PAPER REMAINING of the PAPER SETUP menu, the icon and the remaining amount of roll paper is displayed. Icon Description There is enough ink remaining. ❏ REMAINING PAPER SETUP is set to ON. Prepare a new ink cartridge. (flashing) This icon indicates the yellow tank.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel 8. Option usage icon Displays whether options are available to use or not. Option Icon Auto Take-up Reel Unit Menu Mode The Menu mode enables you to make printer settings similar to those you would normally make in the driver or software, as well as other additional settings, directly through the control panel. The control panel shows the printer information, and operations such as nozzle check can be performed using the control panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel 1. Select a menu. Example: When selecting PRINTER SETUP 2. There are three cases depending on the items you have selected. A A. When you can select a parameter Example: When selecting PLATEN GAP in the PRINTER SETUP menu Press the button to enter the Menu mode. A Press the / B Press the item. button to enter the PLATEN GAP C Press the / button to select a parameter for the item. The current setting is marked with ( ).
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel B. When you execute a function Example: When selecting NOZZLE CHECK in the TEST PRINT menu C. When you want to display the printer information Example: When selecting INK LEVEL in the PRINTER STATUS menu. A In the TEST PRINT menu, press the button to select NOZZLE CHECK. / A In the PRINTER STATUS menu, press the button to select INK LEVEL. B Press the button to enter the NOZZLE CHECK item. B Press the C Press the CHECK.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel Menu list Menu Item Parameter “PRINTER SETUP” on page 20 PLATEN GAP NARROW, STANDARD, WIDE, WIDER, WIDEST PAGE LINE ON, OFF ROLL PAPER MARGIN DEFAULT, TOP/BOTTOM 15mm, TOP 35/BOTTOM 15mm, TOP 45/BOTTOM 15mm, 3mm, 15mm PAPER SIZE CHECK ON, OFF PAPER SKEW CHECK ON, OFF REFRESH MARGIN ON, OFF AUTO NOZZLE CHECK ON: PERIODICALLY, ON: EVERY JOB, OFF PRINT NOZZLE PATTERN OFF, ON: EVERY PAGE, ON: EVERY 10 PAGES INITIALIZE SETT
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel “PAPER SETUP” on page 24 “HEAD ALIGNMENT ” on page 26 “NETWORK SETUP” on page 26 ROLL PAPER REMAINING REMAINING PAPER SETUP ROLL PAPER LENGTH ROLL LENGTH ALERT PAPER TYPE Photo Paper Matte Paper Plain Paper Others CUSTOM PAPER NO PAPER SELECTED CUSTOM PAPER PAPER NO.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel Details of Menu mode PRINTER SETUP * Default settings Item Parameter Explanation PLATEN GAP NARROW You can adjust the distance between the print head and paper. STANDARD * ❏ STANDARD: Normally, select STANDARD. ❏ When selecting other than STANDARD, the following icon appears on the LCD panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel Item Parameter Explanation PAPER SIZE CHECK ON * You can select whether to check the paper width. OFF ❏ ON: Check the paper width and top edge of the paper. ❏ OFF: Do not check the paper width and top edge of the paper. The printer continues to print even if the paper width does not match the data width, and the printer may print beyond the paper. In addition, a wider blank margin may appear at the top of each page.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel TEST PRINT Item Parameter Explanation NOZZLE CHECK PRINT You can print a print head nozzle check pattern for each ink cartridge. See “Nozzle check” on page 73 STATUS SHEET PRINT You can print the current printer status. NETWORK STATUS SHEET PRINT You can print the current network status. JOB INFORMATION PRINT You can print the job information saved in the printer (up to 10 jobs.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel PRINTER STATUS This menu shows the printer status. Item Parameter Explanation VERSION KW0xxxx or KN0xxxx You can see the firmware version. INK LEVEL (ink color) nn% You can see the status of each ink cartridge. MAINTENANCE TANK LEFT nn% You can see the empty space of the maintenance tank. RIGHT nn% JOB HISTORY No. 0 - No.9 INK xxxxx.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel PAPER SETUP When you use non-Epson media, be sure to make the appropriate settings for the paper. Item Parameter Explanation ROLL PAPER REMAINING REMAINING PAPER SETUP You can set the paper remaining counter function only if paper is not loaded in the printer. ROLL PAPER LENGTH ROLL LENGTH ALERT ❏ OFF: The ROLL PAPER REMAINING function is disabled. The Roll Paper Counter icon does not appear on the LCD panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel CUSTOM PAPER SETUP When you use non-Epson media, you need to make settings suitable for the media. After you have selected the paper number, make the following settings. Make sure to select the paper from PAPER TYPE first, and then make the PLATEN GAP setting and so on. To set the custom paper, see the following section.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel HEAD ALIGNMENT You can perform print head alignment. For more details, see the following section. “Print head alignment” on page 79 Item Parameter Explanation PAPER THICKNESS SELECT PAPER TYPE When using Epson special media, select the paper type. If you use non-Epson special media, enter the paper thickness in the range of 0.1 to 1.5 mm.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide The Control Panel Maintenance Mode You can change the language or unit used on the display or return all the setting values to their factory default. A Turn off the printer by pressing the B Press both the button and the button at the same time to turn on the printer. Hold down both buttons until MAINTENANCE MODE is displayed on the LCD panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Paper Handling Available width for borderless printing 10 inches, 300 mm, 13 inches (Super A3), 16 inches, 17 inches, 512 mm (B2), 594 mm (A1), 24 inches (Super A1), 728 mm (B1), 36 inches (Super A0), 44 inches (Super B0) Supported Media Cut sheet We recommend you use Epson special media that can enhance the usage and expressive power of the printing results. See the following section for more information on the paper.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Using Roll Paper C To unlock the adapter holder, push the lock lever of the adapter holder down firmly. Then move the adapter holder to the left with the handle. D Place the paper roll in the gap on the top face of the printer. Loading roll paper To load roll paper, follow the steps below.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling E G Switch the lever of the roll media adapter to fit the core size of the roll paper. Attach the roll media adapters on both ends of the roll paper. Then, pull down the lock lever of the adapters on both sides to lock. Using 2-inch core: Push the adapters into the paper core firmly. Using 3-inch core: F H Release the lock lever of the adapters on both sides.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling I K Slide the adapter holder with the handle to make the left roll media adapter align with on the adapter holder. Slide the adapter holder with the handle to the right to set it in the holder axis firmly. Make sure to set both ends of the roll paper into the adapters firmly. J Roll the roll paper slowly into the roll paper holder. 31 L Push the lock lever of the adapter holder up to lock. M Press the button.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling N P Insert the paper into the insertion slot. Pull the paper down through the paper insertion slot so that it comes out below. Press the button. Take care not to fold the edge of the paper, and insert it so that there is no slack. If you have difficulty feeding the paper, adjust the paper suction by pressing the or button. Pull the paper to fit the edge of the paper to the label position.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Cutting the roll paper Cutting the roll paper after printing There are two ways to cut the roll paper. Cutting the roll paper automatically Method Operation Auto cut Cut the roll paper after printing each page automatically. Manual cut Cut the roll paper manually, or cut the roll paper using cutter sold at a store. Cut the roll paper automatically after printing each page.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling C Removing the roll paper Make sure the printer is turned on. B Open the roll paper cover. button to release the paper The roll paper is rewound automatically if the printer state is after the paper cut but in the READY state. However, when using the optional Auto Take-up Reel Unit, the printer does not rewind the roll paper.Rewind the roll paper manually, if it is not automatically done.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling D E F To unlock the adapter holder, push the lock lever of the adapter holder down firmly. Move the adapter holder to the left with the handle until the end. Then take it off from the holder axis. Pull up the lock lever of the adapter to unlock. Then remove the roll media adapter from the paper roll. After rewinding the roll paper carefully, place it in the original bag that it came in when you purchased it.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Using Cut Sheet Media Loading cut sheet smaller than A3 size The procedures differ depending on your paper size and thickness. Paper Refer to Smaller than A3 size “Loading cut sheet smaller than A3 size” on page 36 A3 or larger or thick paper “Loading cut sheet A3 size or larger / thick paper” on page 37 Note: ❏ Flatten the paper before loading it in the printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling D G Load the sheet into the paper insertion slot until it meets resistance. If you use the paper basket, set it backward position. See “Using the paper basket and paper guides” on page 40 Align the right edge of the paper with the setting position, and then insert the paper until it meets resistance.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling E H Load the sheet into the paper insertion slot. If ARE THESE SETTINGS OK? appears on the LCD panel, press the or button to select NO and then press the button. Set the media type and paper remaining, and then press the button to set the media. The previous setting appears on the LCD panel. If the media type and paper remaining are correct, select YES and then press the button.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling B Ejecting Paper Press the button to remove the paper. This section explains how to eject paper after printing. Note: When you use the paper basket, see the following section. “Using the paper basket and paper guides” on page 40 When you use optional Auto Take-up Reel Unit, see the following section. “Using Auto Take-up Reel Unit (For Epson Stylus Pro 9700/9710 only)” on page 44 c Caution: The paper may fall after ejecting.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling When feeding paper forward Using the paper basket and paper guides The paper guides keep the ejected prints straight. This section explains how to switch the status from feeding paper backward to feeding paper forward. To avoid your prints getting dirty or crinkled, set the paper basket as explained below. The feeding direction is different depending on the media type.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling D Bring the paper basket to the vertical position. When feeding paper backward This makes the basket cloth tight. Feed the prints backward and store them in the paper basket. This section explains how to switch the status from feeding paper forward to feeding paper backward. Note: Do not stack more than one print in the paper basket. If you stack multiple prints, the space between the paper supports and paper basket becomes narrow.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling C E Move the paper guides to the vertical position, and then bring the front basket back as far as it goes. For Epson Stylus Pro 9700/9710, switch the position of the rear paper basket depending on the paper size. If the paper is A1 or smaller: Lift both the front and rear baskets as shown below. D Bring the front paper basket up and fasten it with the hook-and-loop fastener straps.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Tilt the front basket until parallel to the floor when ejecting your prints. Storing the paper basket If the paper basket is not used, bring the front basket up to the vertical position. This section explains how to switch the status from feeding paper backward status to storing paper basket. A For Epson Stylus Pro 9700/9710, bring the rear basket up to the vertical position. B Bring the paper guides to the horizontal position.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling D Tilt the paper guides. Using Auto Take-up Reel Unit (For Epson Stylus Pro 9700/9710 only) When you want to print your data on roll paper and do not want to cut it or feed it out onto the floor, you can use the optional Auto Take-up Reel Unit to roll up your print. You can wind the roll paper forward or backward. Forward Backward w Warning: Make sure the take-up reel unit is installed properly and securely.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Control box Winding paper forward A Turn off the Auto switch of the Auto Take-up Reel Unit and plug the power cord into an outlet, and make sure the sensor light is on. B Turn on the printer by pressing the C Make sure the Auto Take-up Reel Unit icon is displayed on the LCD panel. 1. Sensor light Displays the status of the Auto Take-up Reel Unit. Light Status On It is ready to use. Flashing rapidly It is operating.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling G Winding paper backward Tape the leading edge of the roll paper to the take-up reel core in three places. A Turn on the printer, and then pull out the roll paper. See step 3 to 6 of the following section. “Winding paper forward” on page 45 H Press the button to feed the paper forward and create a loop of slack.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Taking up your prints Removing paper after take-up When the Auto Take-up Reel Unit is installed, and the take-up reel core is loaded with paper to take up in the desired direction, you can use the unit to take up your prints. After paper take-up, follow the steps below to remove the take-up reel core. A Set the Auto switch to Off. B Cut the roll paper. w Warning: Do not touch the Auto Take-up Reel Unit while it is operating.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling D Using the core from a used paper roll as a take-up reel core Remove the take-up reel core from the flange knob on the movable unit and the drive unit. c You can use a used paper roll as the take-up reel core. Caution: The paper roll is heavy so have two people hold it by both ends of the paper roll. Note: If the paper roll core is deformed or damaged, it cannot be used as a take-up reel core.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling C D Installing a take-up reel core Remove the flange by pinching the knob. The method of installing the take-up reel unit is the same for both 2-inch and 3-inch reel cores. A Make sure that the lock lever is released (turned to the left). Slide the movable unit to the left end of the horizontal strut. B Slip one end of the take-up reel core over the flanged knob on the drive unit.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling D Turn the lock lever to the front to lock the movable unit. Printable area Make sure the take-up reel unit is locked properly and firmly. A B-L B-R C Roll paper The minimum top margin is 3.0 mm (0.12") Cut sheets The minimum top margin is 3.0 mm (0.12") Roll paper The minimum left margin is 0.0 mm (0") Cut sheets The minimum left margin is 0.0 mm (0") Roll paper The minimum right margin is 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Handling Parameter A B-L B-R C TOP/ BOTTOM 15mm 15mm 3mm 3mm 15mm TOP35/ BOTTOM 15mm 35mm 3mm 3mm 15mm TOP45/ BOTTOM 15mm 45mm 3mm 3mm 15mm 15mm 15mm 15mm 15mm 15mm 3mm 3mm 3mm 3mm 3mm Note: ❏ The print area does not change even when the margins are changed. ❏ The printer automatically detects the dimensions of the paper that is loaded. Print data that exceeds the printable area of the paper cannot be printed.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings Making the printer driver settings Basic Settings A Print Settings Turn on the printer, and set the paper in the printer. See “Paper Handling” on page 28 This section describes how to print your data from an application using the Epson printer driver. Printing procedures (Windows) B From the File menu, select Print or Page Setup. C Make sure your printer is selected, and click Printer, Setup, Options, Properties, or Preferences.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings E Select the paper source and paper size according to the paper loaded in the printer. Printing procedures (Mac OS X) After making the settings, click OK. Making the paper settings Make sure to select the same paper size as you set in the application. A Start your application. B From the File menu, select Page Setup (or the paper setting menu such as Print.) C Select the printer, and then make the settings.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings Selecting the paper size Roll paper Paper Size *XXXX is the paper size. Explanation XXXX Roll Paper - Banner Select this size when using a banner printing application. This prints no margins on the top and bottom and a 3-mm margin on the right and left sides. XXXX Roll Paper - Borderless (Auto Expand) Select this size when performing borderless printing on the roll paper.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings Cut sheet Paper Size *XXXX is the paper size. Explanation XXXX Sheet - Borderless (Auto Expand) Select this size when performing borderless printing on both the right and left sides of a single cut sheet. In the borderless printing for Auto Expand, the printer driver enlarges the size of print data 3 mm on both the right and left sides. You can change the amount of enlargement in the Expansion setting.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings D Making the printer driver settings A Turn on the printer, and set the paper in the printer. Make the settings. See “Paper Handling” on page 28 B Click Print on the File menu of your application. C Select the printer, then click the button, and then select Print Settings from the list. Select the same media type that you loaded in the printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings Checking the printer status When problem occurs during printing For Windows The Progress Meter appears on your display when you start printing. It indicates the progress of the current print job and provides printer status information such as ink remaining and product number of the ink cartridges. Also, you can cancel a print job using Progress Meter.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings Canceling Printing Canceling printing using the computer (Windows) There are a few ways to stop the print operation depending on the situation. When Progress Meter is displayed Click Stop on the EPSON Progress Meter dialog box. While sending data Cancel using computer Cancel using printer Operation ✓ - Select the data that you want to cancel using the computer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Basic Settings Changing the Black Ink Canceling printing using the computer (Mac OS X) A Click the Printer icon in the Dock. B Select the job you want to delete, and then click the Delete button. Both Photo and Matte Black ink are installed in this printer. Photo Black ink can be used for photo papers with professional quality results. Matte Black ink significantly increases black optical density when printing on matte type papers.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Options and Consumable Products Options and Consumable Products The following consumable products are available for use with your printer (as of May, 2009). For the latest information, see the Epson Web site. Name Product Code Epson special media See the following section for media.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Options and Consumable Products Note: ❏ When using the USB connection and a USB hub, we recommend that you connect the printer to the first hub connected directly to the computer. Also, some hubs may cause unstable operation. If problems occur, connect the printer directly to the USB port of the computer. ❏ When using an Ethernet connection, use a LAN cable. When using a 100BASE-TX STP (shielded twisted-pair) cable, it should be Category 5 or higher.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Notes for when you are not using the printer Maintenance The print head nozzles are very small, thus, they can become clogged easily if dust gets on the print head. To avoid this, close the roll paper cover or the front cover when you are not using the printer. If you are not using the printer for a long time, put a non-static cloth on the printer to avoid getting dust on the printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance ❏ Do not lose the paper package so you can use it for storing the paper. Notes for storing the paper See the instructions below and the handling instructions of the paper for more details. Notes for after printing ❏ Avoid locations that are subject to direct sunlight, excessive heat, or moisture. See the instructions below for after printing. ❏ Do not touch the surface of the print; otherwise, the ink may smudge.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Mac OS X Replacing Ink Cartridges Note: When you replace the ink cartridges while the printer is turned off, the remaining ink cannot be detected correctly so the ink may become unusable before the Ink Check light comes on and you cannot print correctly. Follow the steps below to replace an ink cartridge. When ink needs to be replaced/ When ink gets low Click How to to see the instructions on replacing an ink cartridge.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Using the printer driver Note: In the Monitoring Preferences dialog box, select the Shortcut Icon check box to display a shortcut icon on your Windows System Tray. Right-click the shortcut icon, and select the printer name to display the EPSON Status Monitor 3 dialog box. See “Viewing information in Monitoring Preferences” on page 113 You can check the amount of ink remaining on your computer by using EPSON Status Monitor.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance ❏ Although nothing may be printed, the printer uses ink from all cartridges during head cleaning and other maintenance operations to keep the print heads in good condition. About ink cartridges Be sure to use the ink cartridges that are supported with this printer. See “Options and Consumable Products” on page 60 ❏ Although the ink cartridges may contain recycled materials, this does not effect product function or performance.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Replacing ink cartridges A Make sure the printer is on. B Press the Push the expended cartridge so the cartridge is slightly pushed out. F Carefully pull the expended cartridge straight out of the slot. button. Note: button is not available while The printing or cleaning. C E Press the / button to select OPEN RIGHT COVER, and then press the button. The ink cover is unlocked and slightly opened. D Open the ink cover by hand fully.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Replacing the Maintenance Tank c Caution: Do not touch the green chip on the side of the cartridge. Doing so may prevent normal operation and printing. H The maintenance tank absorbs ink discharged when cleaning the print head. There are two maintenance tanks placed on the left and right for Epson Stylus Pro 9700/9710 and one placed on the right for Epson Stylus Pro 7700/7710.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance E Replacing the maintenance tank Insert the new maintenance tank into place as far as it will go. Be sure to use a maintenance tank that is supported with this printer. See “Options and Consumable Products” on page 60 c Caution: Do not replace the maintenance tank while printing data. A Turn off the printer. B Take a new maintenance tank out of the package.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Replacing the Cutter E Press the F To remove the cover, lower it with the knob, and pull it low. G Screw down the cutter with a screwdriver. H Carefully remove the old cutter from the printer. When the paper cutter does not cut cleanly, it may be dull and require replacement. See the following section for the product code of the paper cutter that is supported with this printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Note: Put the used cutter in a bag or the like, and dispose of it in accordance with local regulations. I Take the new paper cutter out of the package and insert it as shown. K Align the downside of the cover and the cutter holder, and then press the cover firmly until it clicks. L Press the M Make sure the cover is installed, and press the button. button.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Adjusting the Print Head You may need to adjust the print head if white lines appear in your printed data or if you notice the print quality has declined. You can perform the following printer maintenance functions for maintaining the print head in consistently good condition to ensure the best print quality.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Checking the print head nozzles using the computer Nozzle check This function checks the print head*1 nozzles*2 for clogging by printing a nozzle check pattern. Perform head cleaning if you find that the nozzle check pattern is unexpectedly faint or has missing dots in the nozzle check pattern. This section explains how to check the print head nozzle using the Window printer driver. Use EPSON Printer Utility3 for Mac OS X.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance E Check if there are missing dots on the nozzle check pattern. D Press the / button to display NOZZLE CHECK, and then press the button. E Press the button to start printing a nozzle check pattern. F Check the nozzle check pattern. If there are no missing dots, click Finish. If there are missing dots, click Clean.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Cleaning the print head using the computer Head cleaning If you find that the printed data is unexpectedly faint or dots in the printed data are missing, you may be able to solve these problems by using the Head Cleaning utility to clean the print head, which ensures that the nozzles are delivering ink properly. This section explains how to clean the print head using the Window printer driver. Use EPSON Printer Utility3 for Mac OS X.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance D Click Print Nozzle Check Pattern in the Head Cleaning dialog box. Cleaning the print head using the printer’s control panel Confirm the nozzle check pattern. A Press and hold the B Press the / button to display NORMAL CLEANING, and then press the button. See “Nozzle check” on page 73 button. The Power light starts flashing and the head cleaning starts (it takes 2 to 9 minutes.) The cleaning is finished when the Power light is on.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Note: ❏ If the nozzles are still clogged after cleaning the print head a few times, perform power cleaning. See “Power cleaning” on page 77 Power cleaning ❏ Power cleaning process consumes more ink than normal cleaning. A Press the menu. ❏ If the nozzles are still clogged after performing the power cleaning, turn off the printer and leave it overnight or longer, so that the ink may dissolve.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Capping function Automatic maintenance function Capping is a function for automatically covering the print head with a cap (lid) to prevent the print head from drying out. Capping is performed in the following situations. This printer has a self-cleaning function and capping function for maintaining the print head in consistently good condition to ensure the best print quality.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance C Print head alignment To prevent deterioration of print quality caused by misalignment of the print head, align the print head before you start printing your data. You can perform print head alignment using: ❏ computer ❏ printer’s control panel Usually perform print head alignment using the printer driver. If you do not have a computer or software, use the printer’s control panel.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance F Aligning the print head using the control panel To align the print head, see either of the following section. “Aligning the print head automatically” on page 80 “Aligning the print head manually” on page 81 Select AUTO to correct any head misalignment automatically to obtain optimum printing results. If you select MANUAL, you need to check the pattern and enter the value for alignment.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Aligning the print head manually Because there is a distance between the print head and paper, the misalignment may occur by the humidity or temperature or moving the print head bidirectionally. In this case, try UNI-D first, and then BI-D 2-COLOR. If you want to perform a highly accurate adjustment, try BI-D ALL. Alignment Explanation UNI-D Use all ink colors except Cyan to align the print head unidirectionally.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Cleaning the Printer Cleaning inside of the printer If the print gets a scratch or smudge, follow the steps below to wipe off the smudge inside of the printer. To keep your printer in top operating condition, clean it thoroughly if it becomes soiled. c Cleaning the roller Caution: Take care to prevent water or other foreign matter getting inside the printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance C E Open the front cover and use a soft, clean cloth to carefully clean away any dust or dirt inside the printer. Wipe the gray part by following the directions of the arrows. If there is a serious problem of dirt on the inside of the printer, clean it using a soft, clean cloth dampened with a mild detergent. Then, wipe the inside of the printer with a dry, soft cloth.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Keeping the Printer If you have not used your printer for more than six months When storing the printer, place it on a horizontal surface with the ink cartridges installed in the printer. ❏ When activating AUTO NOZZLE CHECK in the panel settings, the printer checks the print head nozzles for clogging, and performs print head cleaning automatically if needed. c Caution: The printer must be kept flat.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Transporting the Printer Transporting the printer When you transport the printer, be sure to repack the printer using the original box and packing materials. When transporting the printer, repack the printer using the original box and packing materials to protect from shock and vibration. c Caution: ❏ When moving or transporting the printer, c Caution: ❏ Do not remove the ink cartridges; otherwise, keep it flat.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Maintenance Setting up the printer after transporting The steps you need to take to set up the printer after transporting it are almost identical to the steps carried out the first time you set up the printer. When you set up the printer again, refer to the Setup Guide. A Make sure that the place is proper. B Plug in the power cable to the electrical outlet, and turn on the printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Problem Solver Error Messages on the LCD Panel Error messages Messages are either status messages or error messages. Many common printer problems can be identified by the lights and messages on the LCD panel. See the following messages to solve problems. Error messages related to paper Error messages Description What to do PAPER OUT LOAD PAPER No paper is loaded in the printer. Load paper correctly.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Error messages Description What to do PAPER ERROR LOAD PAPER CORRECTLY REFER TO THE MANUAL The paper is not loaded correctly. Press the button to release the paper presser, and remove the paper. Then, set the paper correctly. See “Using Roll Paper” on page 29 See “Using Cut Sheet Media” on page 36 PAPER SENSOR ERROR BUTTON PRESS THE LOAD DIFFERENT PAPER The barcode has not been read correctly.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Error messages related to the printer Error messages Description What to do FRONT COVER OPEN CLOSE FRONT COVER The front cover is open. Close the front cover. INK COVER OPEN CLOSE RIGHT INK COVER The ink cover(s) is open. Close the ink cover(s). CANNOT OPEN INK COVER IS ANYTHING OBSTRUCTING THE RIGHT INK COVER? PRESS INK COVER OPEN BUTTON The ink cover(s) cannot be opened. Remove any object if it is obstructing the ink cover(s).
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Error messages related to the maintenance Error messages Description What to do PAPER SENSOR ERROR PRESS THE BUTTON LOAD THE CORRECT PAPER REFER TO THE MANUAL The loaded paper is not proper for the Print Head Alignment. Press the button to clear the error. Press the button to release the paper presser, and then load the paper that matches with the media type selected for the Print Head Alignment.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Error messages Description What to do INK LOW The ink cartridge is nearly expended. Replacement of the ink cartridge is nearly needed. The ink cartridge was found faulty. There may be a bad contact or dew condensation in the cartridge. ❏ INK CARTRIDGE ERROR REPLACE CARTRIDGE See “About ink cartridges” on page 66 Remove the ink cartridge and reinstall it.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Error messages Description What to do INK CARTRIDGE PLEASE USE GENUINE EPSON INK CARTRIDGES Non-genuine ink cartridge is installed. Replace the ink cartridge with a genuine Epson ink cartridge. See “About ink cartridges” on page 66 See “Replacing ink cartridges” on page 67 INK CARTRIDGE NON-GENUINE CARTRIDGE! QUALITY OF NON-GENUINE INK MAY VARY Non-genuine ink cartridge is installed.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Error messages Description What to do TAKE-UP ERROR IS ANYTHING OBSTRUCTING THE TAKE-UP REEL SENSOR SYSTEM? LOAD PAPER AGAIN The Auto Take-up Reel Unit does not wind the paper. Make sure there is no obstruction in the sensor system. Press the button to release the paper presser, and then set the paper correctly in the Auto Take-up Reel Unit.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Troubleshooting You cannot print (because the printer does not work) Cause What to do The printer does not turn on. Is the power cord plugged into the electrical outlet or the printer? Make sure the power cord is securely plugged into the printer. Is there any problem with the electrical outlet? Make sure your outlet works by trying to connect the power cord of another electric product.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do The printer is not correctly connected to the computer. Is the cable plugged properly? Make sure the printer’s interface cable is securely plugged into the correct terminal of the computer. Also, make sure the cable is not broken nor bent. If you have a spare cable, try with the spare cable.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do The printer stops printing. Is the status of print queue "paused"? (Windows) If you stop printing or the printer stops printing because of some troubles, the status of print queue becomes "paused". You cannot print in this condition. Double-click the printer icon in the Printers folder, and select Pause Printing from the Printer menu to clear the check box.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver The printer sounds like it is printing, but nothing prints Cause What to do The print head moves, but nothing prints. or The nozzle check pattern is not printed correctly. If the print head moves, but nothing prints, make sure MOTOR SELF ADJUSTMENT is displayed on the LCD panel. The printer adjusts the motor inside of the printer. Please wait without turning off the printer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver The prints are not what you expected Cause What to do Print quality is poor, uneven, too light, or too dark. Are the print head nozzles clogged? If the nozzles are clogged, the print quality is reduced. Print the nozzle check pattern.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do Print quality is poor, uneven, too light, or too dark. Have you compared the printing result with the image on the display monitor? Since monitors and printers produce colors differently, printed colors will not always match on-screen colors perfectly. ❏ Televisions and monitors produce a range of colors by combining the 3 colors known as the 3 primary colors of light, red (R), green (G), and blue (B).
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do The print is not positioned properly on the paper. Have you specified the print area? Check the print area in the settings of the application and printer. Is the paper size setting correct? If the Paper Size setting and the size of the actual paper do not match, the print may not be where you want it, or part of it may be cut off. In this case, check the print settings.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do The back of the printed paper is soiled. Set PAPER SIZE CHECK to ON in the Menu mode. If the print image is bigger than the paper width and the PAPER SIZE CHECK is OFF, the image is still printed extending beyond the print area, causing the inside of the printer to become soiled. In order to keep the inside of the printer clean, set PAPER SIZE CHECK to ON in the Menu mode.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Feeding or ejecting troubles Cause What to do Unable to feed or eject paper. Is the paper loaded in the right position? Refer to the following for the correct position to load the paper. See “Paper Handling” on page 28 If the paper is loaded correctly, check the condition of the paper that you are using. Is the paper loaded vertically? Single sheets should always be loaded vertically.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do The paper is jammed. To remove jammed paper, follow the steps below: 1. If roll paper is jammed, open the roll paper cover and cut the paper at the paper insertion slot. 2. When the paper presser is not released, make sure that the Pause light is not flashing, and then press the button to release the paper presser. 3. Rewind the roll paper.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Cause What to do The paper is jammed 4. Open the front cover if the paper is jammed inside the printer. Caution: Be careful not to touch the cables around the print head; otherwise, the printer may be damaged. 5. Carefully remove the jammed paper. Be careful not to touch the roller, ink absorption, and ink tubes inside the printer. 6. Close the front cover, and then turn the printer off and back on.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Problem Solver Other troubles Cause What to do Color ink runs out quickly even when printing in the Black mode or when printing black data. Color ink is consumed in print head cleaning. When print head cleaning is performed, all nozzles are cleaned so that the ink for all colors is consumed. (Even when Black mode is selected, the ink for all colors is consumed during cleaning.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) ❏ Makes the printer settings, such as the media type, paper size. You can register these settings, and you can also easily import or export these registered settings. Using the Printer Software (Windows) Printer Software Introduction The printer software CD-ROM includes the following software. See its online help for detailed information for each software.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) Accessing the Printer Driver EPSON Status Monitor 3 This utility provides you with printer status information, such as the ink cartridge status, the empty space of the maintenance tank, and it also checks for printer error. EPSON Status Monitor 3 is installed with the printer driver automatically.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) Example: From the Printer icon When you make common settings or perform printer maintenance, such as Nozzle Check, Head Cleaning, access the printer driver from the Printer icon. A The printer driver window appears. Open the Printers and Faxes or Printers folder. For Windows Vista: , click Control Panel, click Hardware Click and Sound, and then click Printers.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) B Right-click your printer icon, and click Printing Preferences. Getting Information Through Online Help You can view a detailed explanation using the following ways. ❏ Right-click the item, and then click Help. The printer driver window appears. The settings you make here become the default settings of the printer driver.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) ❏ For Windows XP/Windows 2000, click the button on the top right of the printer driver window, and then click the item. Using the Printer Utilities The Epson printer utilities let you check the current printer status and perform printer maintenance from your screen. Nozzle Check This utility checks the print head nozzles to see if they are clogged and need to be cleaned.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) EPSON Status Monitor 3 This utility provides you with printer status information, such as the ink cartridge status, the empty space of the maintenance tank, and it also checks for printer error.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) Using Monitoring Preferences Note: In the Monitoring Preferences dialog box, select the Shortcut Icon check box to display a shortcut icon on your Windows System Tray. Right-click the shortcut icon, and select the printer name to display the EPSON Status Monitor 3 dialog box.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) Viewing information in Monitoring Preferences Uninstalling the Printer Software In the Monitoring Preferences dialog box, you can select error types for which you wish to receive notification, and you can make the shortcut icon setting and monitoring of shared printers setting. This section describes how to uninstall the printer software from your computer.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Windows) D Select the target printer icon, and then click OK. Uninstalling EPSON LFP Remote Panel 2 EPSON LFP Remote Panel 2 can be uninstalled from Uninstall a program from Programs category in the Control Panel. For detailed information, see the EPSON LFP Remote Panel 2 online help. E Follow the on-screen instructions to complete uninstallation. When the confirmation message appears, click Yes.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) Printer driver Using the Printer Software (Mac OS X) The printer driver lets you print documents from applications to the printer. The following are main functions of the printer driver: ❏ Sends the print data to the printer. ❏ Makes the printer settings, such as the media type, paper size. You can register these settings, and you can also easily import or export these registered settings.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) EPSON Printer Utility3 EPSON LFP Remote Panel 2 You can execute the printer maintenance functions, such as Nozzle Check, Head Cleaning. EPSON Printer Utility3 is installed with the printer driver automatically. EPSON LFP Remote Panel 2 gives the user a broad range of control over the printer, to update the firmware or register the custom paper.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) Accessing the Printer Driver Accessing the Print dialog A Click Print on the File menu of your application. B The Print dialog is displayed. To access the printer driver, follow the steps below. The following procedures may differ depending on the application you use. ❏ Page Setup dialog You can make the paper settings, such as media type, paper size.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) Getting Information Through Online Help To access the online help, click the dialog of the printer driver. Using Printer Utilities The Epson printer utilities let you check the current printer status and perform printer maintenance from your screen.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) EPSON LFP Remote Panel 2 This utility lets you optimize your printer. You can start this utility only if it is installed. See the EPSON LFP Remote Panel 2 online help for detailed information. Using EPSON StatusMonitor EPSON StatusMonitor provides you with detailed printer status information, a graphic display of the ink cartridge status and the empty space of the maintenance tank, and status messages.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) Viewing information in EPSON StatusMonitor Uninstalling the Printer Software EPSON StatusMonitor provides you with detailed printer status information, a graphic display of the ink cartridge status and the empty space of the maintenance tank, and status messages. If a problem occurs during printing, an error message appears. Check the message and solve the problem accordingly.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) G For Mac OS X 10.3.9 to 10.4: Double-click the Applications folder, and then double-click the Utilities folder. Double-click Printer Setup Utility. E Double-click the Printer Driver folder. Note: If the folder does not appear, double-click the EPSON icon on the desk top. Delete the printer. For Mac OS X 10.5: Select the printer, and then click -. H Double-click the EPSON_IJ_Printer icon.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Using the Printer Software (Mac OS X) K Select Uninstall from the pull-down menu, and then click the Uninstall button. Uninstalling EPSON LFP Remote Panel 2 Drag the EPSON LFP Remote Panel 2 folder to the Trash. See the EPSON LFP Remote Panel 2 online help for more information. L Follow the on-screen instructions to uninstall the printer driver.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Example: Adobe Photoshop CS4 Variety of Printings From the File menu, select Print. Select Color Management, and select Document. Select Printer Manages Colors for the Color Handling. Then click Print One. Color Adjustment by the Printer Driver You can adjust colors using the printer driver during printing by setting one of the following two color systems.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings E Make the necessary settings. Example: Adobe Photoshop CS4 See the online help of the printer driver for detailed information. From the File menu, select Print. Select Color Management, and select Document. Select Printer Manages Colors for the Color Handling. Then click Print. Note: You can perform the color adjustment by checking the sample image on the left side of the window.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings For Mac OS X 10.3.9 to 10.4: Select Printer Color Management, and click Color Controls, and then click Advanced Settings. Note: When using Adobe Photoshop CS3 or later, Adobe Photoshop Lightroom 1 or later, or Adobe Photoshop Elements 6 or later in Mac OS X 10.5, make sure the settings in step 1 is set, otherwise you cannot select EPSON Color Controls. See “For Mac OS X” on page 124 D Open the advanced settings dialog.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings For Mac OS X 10.3.9 to 10.4: Black-and-White Printing When you want to make prints with a clear black such as for CAD data and line art, select Black for the Color setting in the printer driver. The print image is adjusted without affecting the original data. Note: ❏ Even when printing in black and white, the ink other than black is consumed during cleaning. ❏ F Check other settings, and then start printing.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C B Click Custom for the Mode in the Main menu, and click Advanced. Select Print Settings, and select Black for the Color. For Mac OS X 10.5: D Make the necessary settings, and then start printing. For more detailed information, see the online help of the printer driver. E For Mac OS X 10.3.9 to 10.4: Check other settings, and then start printing. For Mac OS X A Open the Print dialog.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C D Open the advanced settings dialog. For Mac OS X 10.5: Click Advanced Color Settings. Make the necessary settings. For more detailed information, see the online help of the printer driver. For Mac OS X 10.5: For Mac OS X 10.3.9 to 10.4: Select Printer Color Management. For Mac OS X 10.3.9 to 10.4: E 128 Check other settings, and then start printing.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Borderless Printing Supported media type The following media sizes are supported for borderless printing. You can print your data without margins on paper. There are two types of borderless printing. Paper width Note: If you are using roll paper, all four sides can be borderless, and if you are using a sheet of paper, only left and right sides can be borderless.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Application settings Printer driver settings Set the size of the image data using the Page Setting dialog box of the application software. To print your data with this feature, follow the steps below. For Auto Expand For Windows ❏ Set the same paper size as used for printing. A ❏ If your application has margin settings, set the margin to 0 mm. Open the printer driver window.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings D E For Mac OS X Select Borderless, and then click Expansion. Select Auto Expand or Retain Size. If you select Auto Expand, set the amount of enlargement. A Open the Page Setup dialog. B Select the printer, and then select the paper size and borderless printing such as Auto Expand or Retain Size, and then click OK. C Open the Print dialog.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings F For Mac OS X 10.3.9 to 10.4: Select Expansion. If you print on roll paper, select the Auto Cut setting. For Mac OS X 10.5: Select Page Layout Settings. Note: Moving the slider towards Min decreases the amount of the image enlargement; however, as this amount decreases, margins may appear on one or more sides of the paper. E In the Print Settings dialog, select the media type. For Mac OS X 10.3.9 to 10.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Roll paper cut for borderless printing When you use roll paper for borderless printing, the paper cut operation is different according to the Borderless and Auto Cut settings of the printer driver.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Enlarge or Reduce Size Printing Fit to Page You can fit the size of your data to the size of paper you to print on. You can fit the size of your data to the size of paper you print on. There are three ways to enlarge or reduce the size of your data. For Windows A ❏ Fit to Page Proportionally enlarges or reduces the size of your data to make it fit the paper size you have selected in the Output Paper list.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C For Mac OS X 10.4 to 10.5 Select the paper size that is loaded in the printer from the Output Paper list. A Proportionally enlarges or reduces the size of your data to make it fit the paper size you have selected for the Output Paper. Open the Print dialog. See “Accessing the Print dialog” on page 117 B Select Paper Handling, and select Scale to fit paper size. For Mac OS X 10.5: D For Mac OS X 10.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings D Fit to Roll Paper Width (Windows only) A Select the roll paper width that is loaded in the printer from the Roll Width list. Proportionally enlarges or reduces the size of your data to make it fit the paper size you have selected for the Roll Width. Open the printer driver window. See “From Windows applications” on page 107 B Click the Page Layout tab, and then select the same paper size as the paper size of the data.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Custom For Mac OS X Lets you define the percentage you want to reduce or enlarge. A Open the Page Setup dialog. B Select the printer and paper size that is loaded in the printer. C Set the value for Scale. D Click OK. For Windows A Open the printer driver window.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Pages Per Sheet Printing For Windows A You can print two or four pages of your document on one sheet of paper. If you print continuous layout data prepared at A4 size, it will be printed as shown below. Open the printer driver window. See “From Windows applications” on page 107 B Click the Page Layout tab, select the Multi-Page check box, select N-up, and then click Settings.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Poster Printing For Mac OS X A Open the Print dialog. The poster printing function allows you to print poster-size images by enlarging one page to cover several sheets of paper. This function is supported by Windows only. You can make a poster or a calendar by joining the several printed sheets of paper together. Poster printing is available up to 16-fold of the normal printing (four sheets by four sheets.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings A Prepare the print data by using an application. B Open the printer driver window. E The printer driver automatically enlarges the image data during printing. When you want to print a borderless poster, select Borderless in the Main menu. Then, select the Borderless Poster Print check box, and select the number of panels, and then click OK. Then go to step 6.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings G Check the other settings, and then start printing. Joining the sheets together along the guide The steps to join the sheets together are different whether the printed sheets are borderless or not. For borderless poster printing This section explains how to join the four printed pages together. Join the printed pages together appropriately, and stick them on the back of sheets using the cellophane tape.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings For poster printing with margins When you select Overlapping Alignment Marks, the following marks are printed on the paper. See the procedures below to join the four printed pages together using the alignment marks. B Lay the upper left sheet on top of the upper right sheet. The X marks should be matched as in the illustration below, and join the upper left sheet to the upper right sheet with cellophane tape temporarily.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings F Cut the bottom of upper sheets along the alignment mark (horizontal blue line). I Join the upper sheets and lower sheets together with cellophane tape on the back of the sheets. J After joining all the sheets together, cut the margins along the outer guide. The guide is black for the black-and-white printing. G Lay the upper sheets on top of the lower sheets.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Printing on Custom Paper For Windows You can also print on a custom paper, using the steps below. A Open the printer driver window. See “From Windows applications” on page 107 B Click User Defined in the Main menu. The size you can register is as follow.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C Set the custom paper size you want to use, and then click Save. For Mac OS X ❏ You can enter up to 24 single-byte characters for the Paper Size Name. A Open the Page Setup dialog. B Select Manage Custom Sizes in Paper Size. C Click +, and enter the paper size name. ❏ You can easily change the size by selecting the paper size close to the size you want to set in the Base Paper Size.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings D Enter the paper width, paper height, and margins, and then click OK. Note: ❏ To change the setting you have registered, click the paper size name from the list. The paper size and printer margin you can set is as follow. Page setup Paper size Margins Sheet Supported paper size Top, Left, Right: 3 mm Bottom: 14.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Banner Printing on Roll Paper Application settings You need to make the data for printing a banner using an application. If the paper size you want to print is equal to or smaller than the maximum setting size the application can set, select the paper size you prefer. This section explains how to print a banner and panorama pictures. Printer driver settings For Windows A Open the printer driver window.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C F Select Roll Paper or Roll paper (Banner) from the Source list. Note: Roll Paper (Banner) can be used for an application that supports banner printing. D Note: If you are using an application that supports banner printing, you do not need to make Enlarge/Reduce setting if Roll Paper (Banner) is selected for the Source. Click Roll Paper Option, and then select Normal Cut or Off from the Auto Cut list.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings For Mac OS X Note: You cannot make settings if you are using an application that supports banner printing. H Make sure the Optimize Enlargement check box is selected. A Open the Page Setup dialog. B Make sure your printer is selected, and select the document size created using the application. See “Accessing the Page Setup dialog” on page 117 You can also customize the paper size by selecting Manage Custom Sizes.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Printing with Non-Epson Media Setting the custom paper in the printer There are two ways to register a custom size paper. When using non-Epson media, make the paper settings according to the paper characteristics before printing. There are two ways to make settings and to print. ❏ Register the custom paper on the LCD panel of the printer. Set the items for PAPER SETUP menu.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C E Select the registered number for the user setting. You can select the number from 1 to 10. 1. Press the / button to select the number you want to register. 2. Press the button. / button to select PLATEN 1. Press the GAP, and then press the button. 2. Press the / button to select a suitable setting for the paper. 3. Press the button. 4. Press the button to go back to the previous menu.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings F I Print a paper thickness test pattern. 1. Press the / button to select THICKNESS PATTERN, and then press the button. 2. Press the button to print the paper thickness test pattern. Examine the printed pattern to determine which set of lines are aligned (showing the smallest gap), and select the Thickness Number (from 1 to 15). Note: If the ink blurs on the paper, set a longer time for ink drying. 1.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings To use the registered custom settings, follow the steps below. Customize the Items of the Printer Driver button to enter the Menu mode. 1. Press the 2. Press the / button to display PAPER SETUP, and then press the button. 3. Press the / button to select PAPER TYPE, and then press the button. 4. Press the / button to display CUSTOM PAPER, and then press the button. 5. Press the / button to select media type, and then press button.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C Enter the name in the Name box, and then click Save. B Click Custom Settings. C Enter the name in the Name box, and then click Save. You can choose a setting you have registered from the Select Setting list box. Saving as a custom media You can save the items of the Media Settings in the Main menu. A Change the Media Settings items in the Main menu. You can choose a setting you have registered from the Media Type list box.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Menu arrangement C You can arrange the Select Settings, Media Type, and Paper Size items. ❏ You can arrange the list items by drag-and-drop operation. A ❏ To add a new group (a folder), click Add Group. Click the Utility tab, and then click Menu Arrangement. In the List box, arrange the items as you prefer, or classify the items into groups. ❏ To delete the group (a folder), click Delete Group.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Exporting or importing all settings Exporting or Importing You can export or import the all of the printer driver settings as a file. You can export or import the settings you have registered as a file. Exporting the settings A Open the Save or Deletes Select Settings dialog box or the Saves or deletes Custom Media dialog box. B Select the setting in the List box, and click Export.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Place same data Using Layout Manager The Layout Manager function allows you to place the multiple print data made by different applications freely and print them at one time. This function is supported by Windows only. Place data freely You can make a poster or article on display by placing the multiple print data freely. Layout Manager enables you to reduce the paper to print effectively.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Printing with Layout Manager Note: You can open the Layout Manger window in advance. If a shortcut icon is displayed on your Windows System Tray, right-click the shortcut icon, and select Layout Manager to open the Layout Manager window. Note: Use the Layout Manager function when connected to the printer (in the printable state). A Prepare the print data by using an application. B Open the printer driver window.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings G From the File menu in the Layout Manager window, select Properties.... Make the print settings on the printer driver window. Using Color Management You can perform color management by the printer driver in the following three ways. ❏ Color management by Driver ICM (Windows only) You can perform color management by using the printer driver only. It is useful when you use an application that does not support this function.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings The printer profile for each sheet that is needed when performing color management is installed with the printer driver of this product. You can select the profile in the settings dialog box of the printer driver. Color management by Driver ICM (Windows only) See the following for detailed information.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C Select Custom for the Mode in the Main menu, and select ICM, and then click Advanced. D In the ICM dialog box, select Driver ICM (Basic) or Driver ICM (Advanced) for the ICM Mode. E If you select Driver ICM (Advanced), you can specify the profiles and intent for image, graphics, and text data individually. Intent Explanation Saturation Performs conversion, keeping the current saturation unchanged.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings Color management by Host ICM (Windows) C Select Custom for the Mode in the Main menu, and select ICM, and then click Advanced. D Select Host ICM. Use image data in which an input profile has been embedded. The application needs to support ICM. A Make the settings for color adjustment using the application. Depending on the type of application, make the settings following the chart below.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings D Color management by ColorSync (Mac OS X) Select Print Settings and select Off (No Color Adjustment) for Color Setting. Use image data in which an input profile has been embedded. The application needs to support ColorSync. For Mac OS X 10.5 Adobe Photoshop CS3 or later, Adobe Photoshop Lightroom 1 or later, and Adobe Photoshop Elements 6 or later do not support the color management by ColorSync described here.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings B Open the Print dialog. Color management by application See “Accessing the Print dialog” on page 117 C Print using an application with a color management function. Select Printer Color Management, and then select ColorSync. Make the settings for color adjustment by the application and make the color adjustment function of the printer driver invalid. A Make the settings for color adjustment by the application.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Variety of Printings C For Mac OS X 10.3.9 to 10.4, select Off (No Color Adjustment) in the Printer Color Management dialog. Set the color management to off. For Windows, select Custom for the Mode in the Main menu, and then select Off (No Color Adjustment). D Note: When using Windows Vista/Windows XP Service Pack 2 or later and .NET 3.0, Off (No Color Adjustment) is automatically selected. For Mac OS X 10.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Paper Information Paper Information Epson offers specially designed media for ink jet printers to meet most high-quality printing needs. Item Explanation Media name Describes the media name. Size Describes the paper size for cut sheet media and the width for roll paper. Borderless Describes whether borderless printing is available. Recommended: The recommended paper for borderless printing.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Roll paper Premium Glossy Photo Paper (250) Size Borderless 406 mm 16" 610 mm 24" 914 mm *1 36" *1 1118 mm *1 44" *1 ICC profile Photo Black Matte Black Epson Stylus Pro 7700_7710_9700_9 710 PremiumGlossy PhotoPaper250.icc — Recommended Auto Wind *2 Core diameter Forward Backward Y Y 3" Media type of the printer driver Thickness Photo Paper Premium Glossy Photo Paper (250) 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Premium Luster Photo Paper (260) Size Borderless 254 mm 10" 300 mm 12" 406 mm 16" 508 mm 20" Impossible 610 mm 24" Recommended 914 mm *1 36" *1 1118 mm *1 44" *1 ICC profile Photo Black Matte Black Epson Stylus Pro 7700_7710_9700_9 710 PremiumLuster PhotoPaper260.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Photo Paper Gloss 250 Size Borderless 432 mm 17" 610 mm 24" 914 mm *1 36" *1 1118 mm *1 44" *1 ICC profile Photo Black Matte Black Epson Stylus Pro 7700_7710_9700_9 710 PhotoPaper Gloss250.icc — Auto Wind *2 Recommended Core diameter Forward Backward Y Y 3" Media type of the printer driver Thickness Photo Paper Photo Paper Gloss 250 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Premium Semigloss Photo Paper (170) Size Borderless Auto Wind *2 420 mm 16.5" Impossible 610 mm 24" Recommended 914 mm *1 36" *1 1118 mm *1 44" *1 ICC profile Photo Black Matte Black Epson Stylus Pro 7700_7710_9700_9 710 Premium SemiglossPhoto Paper170.icc — Core diameter Forward Backward Y Y 2" Media type of the printer driver Thickness Photo Paper Premium Semigloss Photo Paper (170) 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Enhanced Adhesive Synthetic Paper Size Borderless 610 mm 24" 1118 mm *1 44" *1 ICC profile Photo Black Matte Black — Epson Stylus Pro 7700_7710_9700_9 710 Enhanced AdhensiveSynthetic Paper.icc Auto Wind *2 Possible Core diameter Forward Backward Y Y 2" Media type of the printer driver Thickness Others 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Enhanced Matte Paper Size Borderless 432 mm 17" 610 mm 24" 914 mm *1 36" *1 1118 mm *1 44" *1 ICC profile Photo Black Matte Black — Epson Stylus Pro 7700_7710_9700_9 710 EnhancedMatte PosterBoard.icc Auto Wind*2 Possible Core diameter Forward Backward Y N 3" Media type of the printer driver Thickness Matte Paper Enhanced Matte Paper 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Singleweight Matte Paper (Line Drawing) Size Borderless 432 mm 17" 610 mm 24" 914 mm *1 36" *1 1118 mm *1 44" *1 ICC profile Photo Black Matte Black — Epson Stylus Pro 7700_7710_9700_9 710 Singleweight MattePaper.icc Auto Wind *2 Recommended Core diameter Forward Backward Y *3 N 2" Media type of the printer driver Thickness Matte Paper 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Cut sheet Premium Glossy Photo Paper Size Borderless Thickness Super A3/B Possible 0.27 mm A2 Impossible US-C Possible ICC profile Media type of the printer driver Photo Black Matte Black Photo Paper Premium Glossy Photo Paper Epson Stylus Pro 7700_7710_9700_9710 PremiumGlossyPhotoPaper .icc — Size Borderless Thickness Super A3/B Possible 0.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Paper Information Archival Matte Paper/Enhanced Matte Paper Size Borderless Thickness Super A3/B Possible 0.26 mm A2 Impossible US-C Possible ICC profile Media type of the printer driver Photo Black Matte Black — Epson Stylus Pro 7700_7710_9700_9710 ArchivalMattePaper.icc Matte Paper Archival Matte Paper Enhanced Matte Paper Epson Stylus Pro 7700_7710_9700_9710 EnhancedMattePaper.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Where To Get Help Where To Get Help Contacting Epson Support Technical Support Web Site Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Where To Get Help Help for Users in North America Help for Users in Europe Epson provides the technical support services listed below. Check your Pan-European Warranty Document for information on how to contact Epson support. Internet Support Help for Users in Australia Visit Epson’s support website at http://epson.com/ support and select your product for solutions to common problems.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Where To Get Help ❏ Sales enquiries and product information We encourage you to have all the relevant information on hand when you ring. The more information you prepare, the faster we can help solve the problem. This information includes your Epson product documentation, type of computer, operating system, application programs, and any information you feel is required.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Where To Get Help Bandung Surabaya Yogyakarta Medan Makassar Lippo Center 8th floor Jl. Gatot Subroto No.2 Bandung Phone/Fax: (62) 22-7303766 Hitech Mall lt IIB No. 12 Jl. Kusuma Bangsa 116 – 118 Surabaya Phone: (62) 31-5355035 Fax: (62)31-5477837 Phone: (852) 2827-8911 Fax: (852) 2827-4383 Help for Users in Malaysia Contacts for information, support, and services are: World Wide Web (http://www.epson.com.my) Hotel Natour Garuda Jl.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Where To Get Help E-mail: Epson India Head Office - Bangalore Phone: 080-30515000 Fax: 30515005 epchelpdesk@epc.epson.com.ph World Wide Web (http://www.epson.com.ph) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and E-mail Enquiries are available. Epson India Regional Offices: Location Telephone number Fax number Toll-Free No.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Product Information Mac OS X Product Information System Requirements for the Printer Driver Your computer should meet the following system requirements to use the printer driver: CPU Pentium 4 2 GHz or higher processor Memory 1 GB RAM or more Hard disk space 32 GB or more free hard disk space Interface USB2.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Product Information Printer Specifications Printing Resolution Maximum 720 × 1440 dpi Print direction Bidirectional Control code ESC/P2, ESC/P3 RAM 256 MB for Main 65 MB for Network Printing method On-demand ink jet Character tables PC 437 (US, Standard Europe) Nozzle configuration Black: 720 nozzles × 2 (Photo Black, Matte Black) Character sets EPSON Courier 10 cpi Color: 720 nozzles × 3 (Cyan, Vivid Magenta, Yellow) Paper feed method Fr
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Product Information Electrical Ink cartridges Rated voltage AC 100-240 V Rated frequency range 50 to 60 Hz Rated current Epson Stylus Pro 9700/9710: 1.0 to 0.5 A Epson Stylus Pro 7700/7710: 1.0 to 0.5 A Colors Photo Black Matte Black Cyan Power consumption Vivid Magenta Yellow Cartridge life Epson Stylus Pro 9700/9710: Approx. 85 W Approx. 14 W in Low-power mode Approx.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Product Information Environmental Note: ❏ The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high-quality prints, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and therefore these cartridges may print fewer pages compared to subsequent ink cartridges.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Product Information Standards and Approvals Safety Interface Your printer is equipped with a USB interface and an Ethernet interface. UL 60950-1 CSA C22.2 No.60950-1 Low Voltage Directive 2006/95/EC EMC USB interface EN 60950-1 The printer’s built-in USB interface is based on the standards specified in the Universal Serial Bus Specifications Revision 2.0 and the Universal Serial Bus Device Class Definition for Printing Devices Version 1.1.
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Index Index A F AC inlet............................................................................................10 Adapter holder................................................................................10 Adjust paper margin....................................................................129 Alignment........................................................................................26 Auto cleaning times................................
Epson Stylus Pro 7700/7710/9700/9710 User’s Guide Index O T Option interface connector...........................................................10 Take up reel.....................................................................................26 Technical support.........................................................................176 Temperature units..........................................................................27 Test Print menu........................................................
