Printer User Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap 1-Setting Up the Printer
- Unpacking and Assembling the Epson Stylus Pro 7800
- Unpacking and Assembling the Epson Stylus Pro 9800
- Connecting the Power Cord
- Installing Ink
- Connecting to Your System
- Connecting to the Network
- Installing the Software for Macintosh
- Installing the Software for Windows
- Updating Your Printer Firmware
- Configuring the Printer for Your Network
- Chap 2-Handling Paper and Other Media
- Chap 3-Printing with Epson Drivers for Macintosh
- Chap 4-Printing with Epson Drivers for Windows
- Chap 5-Maintaining and Transporting the Printer
- Checking Printer Status and Part Life
- Checking and Cleaning the Print Head
- Aligning the Print Head
- Replacing Ink Cartridges
- Switching Black Ink Cartridges
- Changing the Date and Time
- Using Maintenance Mode
- Replacing the Paper Cutter Blade
- Replacing the Maintenance Tank
- Cleaning the Printer
- Transporting or Storing the Printer
- Chap 6-Solving Problems
- Appendix A: Specifications
- Index
15
Introduction | 15
Ink Cartridge Safety Instructions
• Keep ink cartridges out of the reach of children and do not drink the
ink.
• Store ink cartridges in a cool, dark place.
• If ink gets on your skin, wash it off with soap and water. If ink gets in
your eyes, flush them immediately with water.
• Shake ink cartridges well before installing them for best results.
• Do not use an ink cartridge beyond the date printed on the cartridge
carton.
• Use up the ink cartridge within six months of installation for best
results.
• Do not dismantle ink cartridges or try to refill them. This could damage
the print head.
• Do not touch the ink supply port, its surrounding area, or the green IC
chip on the side of the ink cartridge. Doing so may affect normal
operation and printing.
Caution: Do not use too
much force when you
shake cartridges that
have been previously
installed.
7800-9800Guide.book Page 15 Monday, April 10, 2006 11:59 AM