Printer User Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap 1-Setting Up the Printer
- Unpacking and Assembling the Epson Stylus Pro 7800
- Unpacking and Assembling the Epson Stylus Pro 9800
- Connecting the Power Cord
- Installing Ink
- Connecting to Your System
- Connecting to the Network
- Installing the Software for Macintosh
- Installing the Software for Windows
- Updating Your Printer Firmware
- Configuring the Printer for Your Network
- Chap 2-Handling Paper and Other Media
- Chap 3-Printing with Epson Drivers for Macintosh
- Chap 4-Printing with Epson Drivers for Windows
- Chap 5-Maintaining and Transporting the Printer
- Checking Printer Status and Part Life
- Checking and Cleaning the Print Head
- Aligning the Print Head
- Replacing Ink Cartridges
- Switching Black Ink Cartridges
- Changing the Date and Time
- Using Maintenance Mode
- Replacing the Paper Cutter Blade
- Replacing the Maintenance Tank
- Cleaning the Printer
- Transporting or Storing the Printer
- Chap 6-Solving Problems
- Appendix A: Specifications
- Index
3-92
92 | Printing with Epson Drivers for Macintosh
To control the amount of expansion (with the Auto Expand setting), select
Expansion from the drop-down menu. You see this screen:
Adjust the slider to increase or decrease the amount of expansion.
The widths shown in the table on page 91 work with the Standard
Expansion setting. If you use the slider to adjust the amount of expansion,
you can calculate the image width as follows:
• Using the Min setting, subtract 0.125 inch from the media width to
determine the image width.
• Using the Max setting, subtract 0.415 inch from the media width to
determine the image width.
7800-9800Guide.book Page 92 Monday, April 10, 2006 11:59 AM