Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Variety of Printings
159
C
Select the registered number for the user setting.
You can select the number from 1 to 10.
1. Press the / button to select the number
you want to register.
2. Press the button.
The settings you make from step 4 are registered
in the number you have selected here.
D
Select paper type, if necessary.
1. Press the / button to select PAPER
TYPE, and then press the button.
2. Press the / button to select media type,
and then press the button.
3. Press the / button to select media.
4. Press the button.
5. Press the button twice to go back to the
previous menu.
E
Set the distance between the print head and the
paper (Platen Gap), if necessary.
1. Press the / button to select PLATEN
GAP, and then press the button.
2. Press the / button to select a suitable
setting for the paper.
3. Press the button.
4. Press the button to go back to the previous
menu.
Note:
We recommend you write down the registered
number and the settings you make from step 4.
Note:
You can adjust the distance between the print
head and paper. The print quality improves
when you adjust the Platen Gap properly. If the
Platen Gap is too narrow when you print on the
thick paper, the print head touches the paper so
that the print head and the paper may be
damaged.
Paper thickness Platen Gap
Thick paper Wider
Wide
Normal paper Standard
Thin paper Narrow