Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
The Control Panel
22
PAPER SKEW CHECK ON O ON:
If the paper is not straight, an error message appears on the
LCD panel and the printer stops printing.
O OFF:
A paper align error does not occur even if the printed data is
out of range of the paper, and the printer continues to print.
This setting is available for roll paper only.
OFF
REFRESH MARGIN ON When you select ON, the printer cuts an extra print area
automatically after borderless printing.
OFF
AUTO NOZZLE CHECK ON: PERIODICALLY The printer performs a nozzle check and if there are missing dots,
it performs cleaning automatically.
O ON: PERIODICALLY
Automatically performs a nozzle check periodically.
O ON: EVERY JOB
Performs a nozzle check before printing each job.
O OFF
Does not perform a nozzle check automatically, except for
some operations.
ON: EVERY JOB
OFF
PRINT NOZZLE PATTERN OFF When you select ON, the printer prints the nozzle check pattern
before printing each print job or the 10th sheet, depending on
the setting you have set.
This setting is available for roll paper only.
ON: EVERY PAGE
ON: EVERY 10 PAGES
CHANGE BLACK INK MANUAL This function is enabled when printing to paper that supports
both matte black and photo black ink.
Select between automatically switching black ink (AUTO) or not
automatically switching black ink (MANUAL) when switching the
type of black ink from the printer driver.
When AUTO is selected, the printer automatically switches to the
type of black ink set in the printer driver, even if the type of black
ink set in the printer driver and the printer itself do not match.
A confirmation message is displayed when MANUAL is selected.
If you choose to continue printing, the printer switches to the
type of black ink specified in the printer driver, and then performs
the printing operation.
When printing to paper that has a specific type of supported
black ink, you cannot set the type of black ink from the printer
driver regardless of this setting. You must set the type of black ink
that is compatible with your paper from the printer's control
panel before printing. See “Changing the Black Ink” on page
61
AUTO
INITIALIZE SETTINGS EXECUTE You can return all setting values you have made in the PRINTER
SETUP menu to their factory set value.
Item Parameter Explanation