Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide

The Control Panel

CUSTOM PAPER

When you use non-Epson media, you need to make settings suitable for the media.

After you have selected the paper number, make the following settings. Make sure to select the paper from PAPER

TYPE first, and then make the PLATEN GAP setting and so on.

To set the custom paper, see the following section.

“Setting the custom paper in the printer” on page 158

Item Parameter Explanation

PAPER TYPE Photo Paper You can select the media type that is most similar to the paper

you are using.

Proofing Paper

Fine Art Paper

Matte Paper

Plain Paper

Others

PLATEN GAP NARROW You can adjust the distance between the print head and paper.

STANDARD: Normally, select STANDARD.

NARROW: Use this when printing on thin paper.

WIDE or WIDER: Select this if you find that printed images are

smeared.

STANDARD

WIDE

WIDER

THICKNESS PATTERN PRINT You can print the paper thickness detection pattern.