Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
The Control Panel
28
HEAD ALIGNMENT
You can perform print head alignment. For more details, see the following section.
“Print head alignment” on page 83
NETWORK SETUP
When you use the printer on the network, set the following items.
Item Parameter Explanation
PAPER THICKNESS SELECT PAPER TYPE When using Epson special media, select the paper type. If you use
non-Epson special media, enter the paper thickness in the range
of 0.1 to 1.5 mm.
SELECT THICKNESS
ALIGNMENT AUTO When you select AUTO, the adjustment pattern for output is read
by the sensor and the optimum adjustment value is registered
automatically in the printer. When you select MANUAL, you need
to check the pattern and enter the value for alignment.
MANUAL
Item Parameter Explanation
NETWORK SETUP DISABLE You can make the network settings using the printer’s control
panel. The following items appear only when ENABLE is selected.
After setting the items, press the button in the NETWORK
SETUP menu, so the network is reset and the network connection
is available after 40 seconds. The NETWORK SETUP menu does not
appear while resetting the network.
ENABLE
IP ADDRESS SETTING AUTO You can select the method to set the IP address to the printer.
When you select PANEL, IP,SM,DG SETTING appears.
PANEL
IP,SM,DG SETTING Ask your system administrator for detailed information.
BONJOUR ON You can enable or disable the Bonjour setting.
OFF
INIT NETWORK SETTING EXECUTE You can return the network settings of the printer to the factory
default value.