Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
The Control Panel
30
Maintenance Mode
You can change the language or unit used on the
display or return all the setting values to their factory
default.
A
Turn off the printer by pressing the button.
B
Press both the button and the button
at the same time to turn on the printer.
Refer to the "Maintenance mode list" on the
right for details.
The setting procedures are the same as those for
the Menu mode.
See “Using the Menu mode” on page 16
C
To exit the Maintenance mode, press the
button to turn off the printer.
Maintenance mode list
Item Parameter Explanation
LANGUAGE JAPANESE You can select the
language to be
displayed on the LCD
panel.
ENGLISH
FRENCH
ITALIAN
GERMAN
PORTUGUE
SPANISH
DUTCH
KOREAN
CHINESE
LENGTH UNITS METRIC You can select a unit
of measurement to
use to display length.
FEET/INCH
TEMPERATURE
UNITS
°C You can select the
unit of temperature
displayed on the LCD
panel.
F
ROLL PAPER
TENSION
1 - 5 You can change the
maximum value of
Roll Paper Tension.
SS CLEANING EXECUTE You can perform
ultrasonic head
cleaning.
DEFAULT
PANEL
EXECUTE You can set all
setting values you
made in the Menu
mode to their factory
set value.
AUTO
CLEANING
TIMES
1 - 3 The number of times
to perform auto
cleaning when a clog
was detected after
performing an auto
nozzle check.
CUSTOM 0 - 255 You can make
custom settings.