Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Paper Handling
41
E
Load the sheet into the paper insertion slot.
F
Make sure that the right and bottom edges of the
sheet are straight and in line with the set line.
If you have difficulty adjusting the thick paper,
adjust the paper suction by pressing the or
button.
G
Press the button.
After a few seconds, the paper moves to the start
position. If you press the button, it moves
at once.
H
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the or button to select
NO and then press the button. Set the media
type and paper remaining, and then press the
button to set the media.
The previous setting appears on the LCD panel.
If the media type and paper remaining are
correct, select YES and then press the
button.
I
If you use the paper basket, set it in the forward
position.
See “Using the paper basket and paper
guides” on page 43