Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Paper Handling
42
Ejecting Paper
This section explains how to eject paper after printing.
For roll paper
See the following section to cut the roll paper.
“Cutting the roll paper” on page 36
For cut sheet media
A
When printing is complete, the printer supports
the printed media, and PAPER OUT. LOAD
PAPER is displayed on the LCD panel.
If READY appears on the LCD panel, press the
button to feed the paper.
B
Press the button to remove the paper.
Note:
When you use the paper basket, see the following
section.
“Using the paper basket and paper guides” on page
43
When you use optional Auto Take-up Reel Unit, see the
following section.
“Using Auto Take-up Reel Unit (For Epson Stylus
Pro 9900/9910 only)” on page 47
c
Caution:
Do not press any buttons when the Power
light or the Pause light is flashing.
c
Caution:
The paper may fall after ejecting. Be sure
to hold the paper to avoid falling and
damaging the paper.