Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
73
E
Insert the new maintenance tank into place as
far as it will go.
F
For Epson Stylus Pro 9900/9910, repeat step 3 to
5 to replace the maintenance tank on the other
side.
Replacing the Cutter
When the paper cutter does not cut cleanly, it may be
dull and require replacement. See the following section
for the product code of the paper cutter that is
supported with this printer.
See “Options and Consumable Products” on page
63
A
Make sure the printer is on.
If paper is loaded, remove it from the printer.
B
Press the button to enter the Menu mode.
C
Press the / button to select
MAINTENANCE, and then press the button.
D
Press the / button to select CUTTER
REPLACEMENT, and then press the button.
c
Caution:
Do not touch the green chip on the side of
the maintenance tank. Doing so may
prevent normal operation.
c
Caution:
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.