Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
75
K
Screw up the cutter firmly with a cross head
screwdriver.
L
Align the downside of the cover and the cutter
holder, and then press the cover firmly until it
clicks.
M
Install the SpectroProofer Mounter if it was
attached, and then turn the printer on.
The cutter holder moves to the home position. If
the SpectroProofer Mounter is installed, the
following operation (step 14 to 15) is not
necessary.
N
Press the button.
O
Make sure the cover is installed, and press the
button.
Note:
Screw up the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.