Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Problem Solver
92
Error messages related to the printer
Error messages Description What to do
FRONT COVER OPEN
CLOSE FRONT COVER
The front cover is open. Close the front cover.
INK COVER OPEN
CLOSE RIGHT AND LEFT INK COVERS
The ink cover(s) is open. Close the ink cover(s).
INK COVER OPEN
CLOSE RIGHT INK COVER
INK COVER OPEN
CLOSE LEFT INK COVER
CANNOT OPEN INK COVER
IS ANYTHING OBSTRUCTING
THE RIGHT INK COVER?
PRESS INK COVER OPEN BUTTON
The ink cover(s) cannot be
opened.
Remove any object if it is obstructing the ink cover(s).
Then, press the button again.
CANNOT OPEN INK COVER
IS ANYTHING OBSTRUCTING
THE LEFT INK COVER?
PRESS INK COVER OPEN BUTTON
F/W INSTALL ERROR
UPDATE FAILED
RESTART THE PRINTER
The printer fails to update
the firmware.
Turn the printer off, and then restart the printer. Then,
update the firmware using EPSON LFP Remote Panel 2
again.
PRINTER ERROR
RESTART THE PRINTER
The printer needs to be
restarted while recovering
the error.
Turn the printer off, and after a while turn it on again.
COMMAND ERROR
CHECK DRIVER SETTINGS
The printer receives data
that is unsupported by the
printer.
Stop printing, and press the button to cancel the
job and reset the printer.
The printer receives data
with a wrong command.
The installed printer driver
is not correct for the
printer.
Stop printing, and press the button to cancel the
job and reset the printer. Then make sure that the
installed printer driver is correct for the printer.