Operation Manual

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
The Control Panel
23
TEST PRINT
MAINTENANCE
You can perform maintenance functions, such as head cleaning.
Item Parameter Explanation
NOZZLE CHECK PRINT You can print a print head nozzle check pattern for each ink
cartridge.
See “Nozzle check” on page 77
STATUS SHEET PRINT You can print the current printer status.
NETWORK STATUS SHEET PRINT You can print the current network status.
JOB INFORMATION PRINT You can print the job information saved in the printer (up to 10
jobs.)
CUSTOM PAPER PRINT You can print custom paper information registered in the CUSTOM
PAPER menu.
Item Parameter Explanation
CUTTER ADJUSTMENT EXECUTE You can fine tune the cutting position when printing to roll paper
with no margins in all directions. When using this function, a
cutter position adjustment pattern is printed. You can select the
cutter position number within a range of -120 to +120 mil (-3.0 to
+3.0 mm) in increments of 8 mil (0.2 mm).
CUTTER REPLACEMENT EXECUTE Starts the cutter replacement operation.
See “Replacing the Cutter” on page 73
CLEANING NORMAL CLEANING You can perform normal cleaning.
CLEAN COLOR PAIRS You can select the nozzles to clean from the following two-color
combinations; C/VM, PK (MK)/LK, LLK/Y, or VLM/LC.
POWER CLEANING You can clean the print head more effectively than normal head
cleaning.
CLOCK SETTING MM/DD/YY HH:MM You can set year, month, date, hour, and minute.