Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
71
E
Push the expended cartridge so the cartridge is
slightly pushed out.
F
Carefully pull the expended cartridge straight
out of the slot.
G
Remove the new cartridge from the package,
shake the ink cartridge at least 15 times
horizontally in approximately 5 cm movements
as shown in the illustration.
H
Hold the ink cartridge with the arrow mark
facing up and pointing to the rear of the printer,
and then insert it into the slot as far as it will go
until it clicks.
Match the ink cartridge color with the color
label on the back side of the ink cover.
I
Close the ink cover.
w
Warning:
If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets
into your eyes, flush them immediately
with water.
c
Caution:
Do not touch the green chip on the side of
the cartridge. Doing so may prevent
normal operation and printing.
Note:
Be sure to install all eleven ink cartridges. You
cannot print if any of the ink cartridges is not
installed.