Operation Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
74
E
Press the button.
The paper cutter holder stops at the replacement
position.
F
If the optional SpectroProofer Mounter is
attached to the printer, remove it from the
printer and then turn off the printer.
See the SpectroProofer Mounter 24"/44" User’s
Guide for details on removing it from the
printer.
G
To remove the cover, lower it with the knob, and
pull it low.
H
Screw down the cutter with a screwdriver.
I
Carefully remove the old cutter from the
printer.
J
Take the new paper cutter out of the package
and insert it as shown.
Install the cutter into the cutter holder, setting
the pin of the cutter to the hole of the holder.
w
Warning:
Take care not to hurt yourself with the
blade of the cutter. Do not let children
touch the blade.
Note:
Put the used cutter in a bag or the like, and
dispose of it in accordance with local
regulations.