Instruction manual

54 | Handling Media and Printouts

If you need to clean the print head, press and hold the Menu button for

three seconds. The Pause light flashes and

CLEANING appears on the

LCD display.

Cleaning is finished when the Pause light stops flashing and

READY

appears on the LCD display.

Adjusting the Print Head Height

If you loaded thick media, or notice any smearing on sharply curled media or

after printing at a high speed, the print head may be rubbing against the

media. To avoid this, you can adjust the print head height (platen gap).

1. Make sure the printer has finished printing.

2. Open the front cover.

Note: Raising the print

head height may affect

your print quality, so run a

test print before printing

any large jobs.