Instruction manual

66 | Handling Media and Printouts

Replacing Roll Media

When you run out of media or need to change the type of media you are

using, follow these steps:

1. Make sure the P Power light is not flashing, then release the paper lever.

LEVER RELEASED appears on the LCD display.

2. Turn the roll backward using the roll paper holders and remove any

remaining media from the feed slot.

3. Release the right roll paper lever and slide the holder off the end of the

roll.

Caution: Do not release

the paper lever while the

P Power light is flashing,

or you may damage the

printer.