Instruction manual

75
Maintaining the Printer | 75
7. When cleaning is finished and the P Power light stops flashing, print a
nozzle check pattern to confirm that the print head is clean (see
page 73).
For effective cleaning, always run a nozzle check between cycles.
If the pattern is still missing segments or has deflections after cleaning, clean
the print head again using a higher level cleaning cycle.
If the highest level of cleaning cycle still does not unclog the nozzles, you can
wash the ink system. See page 86 for instructions.
Replacing Ink Cartridges
When you need to replace an ink cartridge, use the following Epson
UltraChrome
®
GS ink cartridges:
You can purchase genuine Epson ink and paper from an Epson Professional
Imaging Authorized Reseller. To find the nearest reseller, visit
www.proimaging.epson.com (U.S. sales), www.epson.ca (Canadian sales), or
call 800-GO-EPSON (800-463-7766). Or you can purchase online at
www.proimaging.epson.com (U.S. sales) or www.epson.ca (Canadian sales).
Slot no. Cartridge Part number
1 Orange T624800
2 Green T624700
3 Light Magenta T624600
4 Light Cyan T624500
5 Black T624100
6 Yellow T624400
7 Magenta T624300
8 Cyan T624200
Note: You must use at
least a 10
× eye loupe to
examine the nozzle check
pattern for deflected
nozzles.
Note: We recommend
that you use genuine
Epson cartridges and do
not refill them. The use of
other products may affect
your print quality and
could result in printer
damage.
Yields vary considerably
based on images printed,
print settings, paper type,
frequency of use, and
temperature. For print
quality, a small amount of
ink remains in the
cartridge after the
“replace cartridge”
indicator comes on.
For best printing results,
use up a cartridge within
six months of opening the
package.