User`s guide

1. In Maintenance mode, press the Paper Feed/Down d or Ink Cover Open/Up u button to
display LANGUAGE, and press the Menu/Right r button.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u to select a suitable language.
3. Press the Enter
button to set the language. Confirm that the READY (or similar word in the
language selected) appears on the LCD panel.
Note:
It takes a while until READY (or similar word in the language selected) appears.
UNIT
You can select a unit of measurement to use to display length. To select a unit, follow the steps below.
1. In Maintenance mode, press the Paper Feed/Down d or Ink Cover Open/Up u button to
display UNIT, and press the Menu/Right r button.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a suitable unit.
3. Press the Enter
button to set the unit.
DEFAULT PANEL
You can set all setting values you made in Menu mode to their factory set value.
Epson Stylus Pro 3880 User’s Guide
The Control Panel 143