User`s guide

3. Make sure the print head is in the home (far right) position.
4. Turn off the printer.
5. Make sure the printer is turned off, and then unplug the power cord.
6. Insert the protective materials and repack the printer. Contact your dealer for assistance. See
“Contacting Customer Support” on page 201.
Over a short distance
If you need to move the printer over a short distance, be sure to perform the following tasks.
❏ Remove the rear sheet guide.
❏ Lift the printer. The printer weighs approximately 19.6 kg (43.2 lb) and must be lifted carefully.
Setting up the printer after transporting it
The steps you need to take to set up the printer after transporting it are almost identical to the
steps carried out the first time you set up the printer. When you set up the printer again, see the
Start Here, and note the following points.
❏ Do not forget to remove any protective materials.
Epson Stylus Pro 3880 User’s Guide
Maintenance and Transportation 175