User`s guide

❏ Use only the power cord that comes with this product. Use of another cord may result in fire
or electric shock.
❏ Do not use a damaged or frayed power cord.
❏ If you use an extension cord with this product, make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the
total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.
❏ Do not attempt to service this product yourself.
❏ Unplug this product and refer servicing to qualified service personnel under the following
conditions:
The power cord or plug is damaged; liquid has entered the product; the product has been
dropped or the cabinet damaged; the product does not operate normally or exhibits a distinct
change in performance.
❏ If you plan to use the printer in Germany, observe the following:
To provide adequate short-circuit protection and over-current protection for this printer, the
building installation must be protected by a 10 or 16 amp circuit breaker.
When using this product
❏ Do not put your hand inside this product or touch the ink cartridges during printing.
❏ Do not move the print heads by hand; otherwise you may damage this product.
❏ Always turn the product off using the Power button on the control panel. When this button is
pressed, the Power light flashes briefly then goes off. Do not unplug the power cord or turn off
the product until the Power light stops flashing.
When handling the ink cartridges
❏ Keep ink cartridges out of the reach of children and do not drink.
❏ If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them
immediately with water.
Epson Stylus Pro 3880 User’s Guide
Safety Instructions 223