Service manual

4.
When the main menu appears, choose “3, Head Angle Confirmation Pattern Printing” by typing 3 and
pressing ENTER. (The printer prints a check pattern with the sample name.)
When replacing both the black and color heads, always adjust the color head angle first. The
black head angle and the black - color head vertical position adjustments are based on the color
head angle adjustment.
Angular spacers for the color head come in five thicknesses, each having its own shape. The following figure
shows the relationship between the shape and thickness. Since the color head is not equipped with a linear
spacer, the angle adjustment is decided only by the angular spacer (specifically designed for the color head),
which is placed under the left side of the head base.
5. In Figure 4-9, pay attention to the position of A and B while you reset the left angular spacer. The
replacement procedure is explained beginning in step 6.
6. Turn off the printer now.
3-1 YMC HEAD ANGULAR
Magenta
Magenta Cyan
Cyan
A
B
Figure 4-9. Color Head Angle Confirmation Sample
Angular Spacers (For Color Head)
angular spacer YMC
Spacer Name Thickness Shape
0.30
0.35angular spacer YMC-B
angular spacer YMC-C
angular spacer YMC-D
angular spacer YMC-E
0.40
0.45
0.50
Figure 4-10. Relationship between the Shape and Thickness
Adjustment Stylus Pro XL+ Service Manual
4-10 Rev.A