Service manual

The adjustment value input menu appears as shown:
INPUT ADJUST No. (IF OK INPUT Y)? ■
adjust range (from –32 to 32)
5. If the sample print is not vertically aligned for both odd-numbered lines (black lines) and
even-numbered lines (magenta lines), enter a compensation value in the range from −32 to +32.
❏ Positive compensation value: Shifts the 2nd line to the left
❏ Negative compensation value: Shifts the 2nd line to the right
When both the black and magenta lines are vertically aligned, input Y or y, and press ENTER. This
returns you to the main menu.
6. When the main menu appears, choose “10, Change customer & data / END” by typing 10 and Enter.
(This returns you the destination setting menu.)
7. Choose “7, END” by typing 7 and pressing ENTER to quit the adjustment program.
Settings have not yet been written to the EEPROM. Turn off the printer immediately after the
adjustments.
8. Turn off the printer.
Adjustment Stylus Pro XL+ Service Manual
4-16 Rev.A