Service manual

Note: When checking the gap between the carriage roller and the front frame, use the thickness
gauge or the paper guide plate. If the gap is correct the gauge cannot be installed into the
gap. If the gap is incorrect, the gauge can be inserted in the gap.
6. Move the carriage manually to the right adjustment position and repeat steps 3, 4 and 5 referring to
Figures 4-17 and 4-18.
GAP
0.04 mm
Thickness
Gauge
Eject Frame
Carriage Roller
Figure 4-18. Confirming the Gap
Adjustment Stylus Pro XL+ Service Manual
4-20 Rev.A