Product information guide
EPSON Stylus Scan 2000
9/99 EPSON Stylus Scan 2000
 - 3
Printable Area
A The minimum top margin is 0.12 inch (3.0 mm). When printing multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin 
is 1.2 inches (30 mm).
BL The minimum left margin is 0.12 inch (3.0 mm).
BR The minimum right margin is:
1.10 inches (28 mm) for #10 envelopes
0.28 inch (7.0 mm) for DL envelopes
0.12 inch (3.0 mm) for all other paper sizes.
C The minimum bottom margin is 0.55 inch (14.0 mm) using the Standard printable area setting. This can be decreased to 0.12 inch (3.0 mm) 
using the Maximum printable area setting. However, the print quality in the expanded printable area may be reduced.
Note:
Always load paper into the paper feeder short edge first except envelopes. Load envelopes long edge first.
Ink Cartridges
* The print capacity may vary depending on how often you clean the 
print head.
** The ink thaws and is usable after approximately 3 hours at 77 °F 
(25 °C).
Caution:
To ensure good results, use genuine EPSON cartridges and do not 
refill them. Other products may cause damage to your printer not 
covered by EPSON’s warranty.
Do not use an ink cartridge after the expiration date on the package.
Mechanical
Paper feed method Friction with paper feeder, rear entry
Paper feeder capacity Maximum 100 sheets of 17 lb 
(64 g/m
2
) paper
Dimensions
Storage Width: 17.2 inches (437 mm) 
Depth: 15.1 inches (383 mm) 
Height: 11.8 inches (300 mm)
Printing Width: 17.2 inches (437 mm) 
Depth: 24.3 inches (618 mm)
Height: 11.8 inches (300 mm)
Weight 16.5 lb (7.5 kg) without the ink cartridges
Scanning
Scanner type Sheet-fed color image scanner 
Photoelectric device Color CCD line sensor
Effective pixels 2550 × 4200 pixels (300 dpi)
Document size 8.5 × 14 inches (216 × 355.6 mm)
(The reading area can be specified from 
your software.)
Scanning resolution 300 dpi (main)
600 dpi (sub)
Output resolution 50 to 4800 dpi
Color separation RGB color filters on CCD
A
BL
BR
C
A
BR
C
BL
Envelopes
Single sheets and cards
Specification
Black ink cartridge 
(S020189)
Color ink cartridge 
(S020191)
Color(s) Black Cyan, magenta, and 
yellow
Print capacity* 900 pages text (ISO/IEC 
10561 letter pattern)
300 pages graphic (5% 
coverage)
300 pages (5% coverage 
each color)
Cartridge life 2 years from production date and up to within 
6 months after opening package at 77 °F (25 °C)
Storage 
temperature
–4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Transit 
temperature
–22 to 140 °F (–30 to 60 °C)
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Freezing 
temperature**
3.2 °F (–16 °C) –0.4 °F (–18 °C)
Dimensions 1.09 (W) × 2.1 (D) × 1.5 (H) 
inches
27.8 (W) × 52.7 (D) × 
38.5 (H) mm
1.7 (W) × 2.1(D) × 1.5 (H) 
inches
42.9 (W) × 52.7 (D) × 
38.5 (H) mm










