Installation Instructions

25
Setting Up Your Stylus Scan 2000
English
6. Press the cartridge clamp down until it locks into place. The ink out light goes
off after you close the clamp.
Caution:
Once you install the ink cartridges, do not open their clamps again
until you replace the ink cartridges. Otherwise, the cartridges may
become unusable.
7. Press the
cleaning button and release quickly. The print head moves left to
the black ink cartridge installation position.
Caution:
Install both ink cartridges. If either of the cartridges is not installed,
the EPSON Stylus Scan will not work.
8. Lift up the ink cartridge clamp.