Operation Manual

Stylus Scan Parts and Functions 1-3
Control panel
You can control copy, print and scan functions with the control
panel, and also check device status.
There are four control panel operation modes. LCD panel
messages and operation vary by mode.
Copy Mode This is the normal mode, and in this mode the system is ready
to make a copy.
The LCD will display the following items:
Reduce/Enlarge, B&W/Color, Quality, Copies
Set-up
Mode
This mode is used to change Copy settings.
Use this mode to change settings with the panel buttons.
Status
Mode
The system switches to this mode when the Stylus Scan is
performing an action (print, scan or copy).
Error and status messages are displayed.
Menu Mode Hold down the Quality and B&W/Color buttons for 3 seconds
to enter this mode. It is used to set the following items:
Status sheet, bottom margin and Metric/US select
Panel language select, Restore defaults
Copy
Stop/Clear
CopiesQualityB&W/ColorReduce/Enlarge
Scan
Error
Set
ItemReturnHold for Menu
Darker/LighterPaper Size
Operate