Operation Manual

8-42 Scanner
❏ Tone Correction in the Tone Correction dialog box
❏ Gray Balance Intensity, and Saturation in the Color
Adjustment dialog box
❏ Auto Exposure
Note:
Although the image in the Preview window changes as you make
settings, the settings do not affect the actual image until you scan, or re-
scan, the image.
Document Source
When using the document table of the Stylus Scan, leave the
Document Source set to Flatbed
. Other selections are available
depending on what is installed. These are the optional Automatic
Document Feeder, and TPU for Neg. Film or TPU for Pos. Film
(for the optional Film Adapter).
Note:
Uninstalled options are not displayed.
Flatbed:
Choose this setting to use the document table of the Stylus Scan.
Automatic Document Feeder:
Choose this setting to use the optional Automatic Document
Feeder.