Operation Manual

Copier 9-3
Loading the Paper
Load the paper to be used for copying into the Stylus Scan.
The following paper sizes and types can be used:
Follow these steps to load paper for copying.
1. Slide out the output tray. Next, slide the left edge guide to
adjust the width of the loading area so that it is just wider than
the width of your paper.
Paper size: Metric* A4, B5, A6
US* Letter, Half Letter, 5x8"
* Select either Metric or US size in the Menu Mode (Control Panel
Setting). For details, refer to “Changing the Control Panel
Settings” on page 9-16.
Paper type: The following types of paper can be used depending on the
Quality setting.
Normal: Plain paper
Fine: Plain paper
Photo: EPSON Photo Paper