Operation Manual

Copier 9-17
Bottom Margin
This is used to set the paper Bottom Margin for copying to either
3 or 14 mm. The initial setting is 14 mm.
Note:
You can extend the minimum bottom margin to 3mm. However, copy
quality may degrade in the expanded area.
Paper Size
This is used to set the paper size category for copying. Press the
Copy button to select Metric or US. In Metric, you will be able to
use paper sizes A4, B5, and A6. In US, you will be able to use
Letter, Half Letter, and 5x8".
Language
This is used to set the language used on the LCD panel. Press the
Copy button to select the display language.
Set Factory Default
Returns Menu Mode settings (Bottom Margin, Paper Size,
Language) to the factory defaults.
Using the Copy Utility (from EPSON SMART PANEL)
Copy Utility is a function within EPSON SMART PANEL. Before
you can use it, you must install the EPSON Stylus Scan Software
and EPSON SMART PANEL in the computer. Refer to the Setup
Guide for details on installation.
Note:
The Copy Utility is only available in Windows. For Macintosh, use
PersonalCopy.