Operation Manual

11-22 Maintenance
5. After removing jammed paper, make sure that the cover is
closed, and push the feeder mechanism down until it clicks
into place.
Cleaning the Stylus Scan
To keep your Stylus Scan operating at its best, clean it thoroughly
several times a year.
1. Make sure the Stylus Scan is turned off and all of its lights are
off. Then unplug the power cord.
2. Remove all paper from the sheet feeder.
3. Use a soft brush to carefully clean away all dust and dirt.
4. If the outer case or the inside of the sheet feeder is dirty, clean
it with a soft, clean cloth dampened with mild detergent. Keep
the document and maintenance cover closed to prevent water
from getting inside.
5. If the document table is dirty, open the document cover. Then
clean the glass with a soft, clean and dry cloth, or with a
blower brush.
6. If the inside of the Stylus Scan accidentally gets soiled with
ink, wipe the ink away with a damp cloth.
Warning:
Be careful not to touch the internal gears.