Operation Manual

7-4 Checking Printer Status and Managing Print Jobs for Macintosh
The options in this dialog box allow you to make the following
settings.
Controlling Background Printing
After you send a print job to the Stylus Scan, you can use the
EPSON Monitor3 utility to check, control, or cancel print jobs that
are queued for printing. This utility also shows the status of the
job currently being printed.
Note:
If the installation of a new application makes it impossible to use
Background Printing, this is because some of the Extension files used by
Background Printing have been overwritten as previous versions of
themselves by the new application’s installer. Re-install the Stylus Scan
driver to solve this problem.
Error notification Choose how StatusMonitor notifies you in
case of an error.
Warning Choose how StatusMonitor notifies you if a
warning message is necessary.
Temporary Spool
folder
Choose a folder for temporary spooling of print
data.
Temporary High Speed
Copies folder
Choose the folders for multiple-copy print data
storage.
Data will be sent to the
printer after being
stored on your disk
Select this check box if you want to send the
data together after the printing command file
is made. When this check box is on, the data
is sent to the printer after making the
command file for pages which are necessary
for printing. This can prevent horizontal
banding in your printout.
Check for errors before
starting to print.
Click this check box if you want to check for
errors before starting to print.
Check the ink level
before starting to print.
Click this check box if you want to check the
ink level before starting to print.