Technical information

15
Sawgrass Technologies, Inc. ~ Epson
®
WorkForce 30/T30/B40W ~ ChromaBlast™
• Read the documentation on installing and using your
ChromaBlast Driver WF30/T30/B40W IQ Driver.
• Perform a nozzle check from the Epson driver utility – a few
cleanings may be necessary to prime the system.
• You may have a little air in your lines but this will clear
after a few prints.
• If you are going to leave your system without using it for
several days, you should turn the plastic valves on the ink
bags to the shut/off position.
• Do not raise the ink box higher than the printer.
• If the printer’s red in-out light (middle light on the front
panel) stays lit, then remove the ink cartridge damper and
reinstall it making sure to firmly press each ink cartridge
into place.