Operation Manual

216 Replacing Ink Cartridges

Caution:

The P power light continues to flash while the printer

performs the ink charging operation. Never turn off the

printer while this light is flashing. Doing so can result in

incomplete charging of ink.

Note:

If the ink end error occurs after the print head moves to its home

position, the ink cartridge may not be installed properly. Press the

H ink button again, and reinstall the ink cartridge until it clicks into

place.

Using the EPSON Status Monitor

You can monitor the remaining ink levels from your computer

and view on-screen instructions for replacing a low or empty ink

cartridge using EPSON Status Monitor 3 (Windows) or

EPSON StatusMonitor (Macintosh).

When an ink cartridge is low or empty, click How to in the EPSON

Status Monitor window. Follow the on-screen instructions to

replace the cartridge.

For more information on using EPSON Status Monitor, see the

section below.

& See “Using EPSON Status Monitor 3” on page 238 for Windows

& See “Using EPSON StatusMonitor” on page 242 for Macintosh

Replacing an Ink Cartridge

In some circumstances, you may need to replace an ink cartridge

before it is empty.