Operation Manual

364

“Removing the roll paper” on page 365

Note:

Turn the roll paper knobs to take in the slack of the roll paper.

Cutting the roll paper

1. Press the z roll paper button to feed the paper. A cutting

guideline is printed on the roll paper.

Caution:

Do not press the z roll paper button for more than three

seconds. Otherwise the roll paper will feed backward and your

print out may be damaged.

2. Cut the paper along the printed line. Never pull the paper as

you cut it, otherwise the printout may be damaged. When

cutting the paper, do not cross the line towards the printer, as

this may cause paper feed problems.

Note:

Epson recommends that you use a triangle or other tool to ensure

that the end of the roll is cut perpendicularly. A diagonal cut may

cause paper feed problems.