Installation Instructions

46
Time
This setting is to print the time information contained in your
photo data. The default setting is None.
The following examples show the format options for setting the
time.
Photo Information
If your photo data contains the photo information conforms to
Exif standard, the information can be printed with this setting.
Following information will be printed:
Exposure time/Shutter speed (Exposure time takes precedence if
both values exist. ex. 1/30s)
F number (ex. F2.8)
ISO speed rate (ex. ISO100)
The default setting is Off.
None Does not print the time.
12-hour system 10:00
24-hour system 22:00
On Prints photo information: Exposure time/Shutter speed/
Off Does not print any photo information.