Installation Instructions

Paper improperly loaded

If you have loaded the paper too far into the printer, the printer

cannot feed the paper correctly. Turn the printer off and gently

remove the paper. Then turn the printer on and reload the paper

properly.

Paper is not ejected fully or is wrinkled

❏ If the paper does not eject fully, press the ( maintenance

button, then open the printer cover and remove the paper.

Also, check the Paper Size setting in the LCD panel. If the

paper is wrinkled when it comes out, it may be damp or too

thin. Load a new stack.

Note:

Store any unused paper in its original packaging in a dry area.

CD/DVD tray is ejected when sending a CD/DVD

print job

If the CD/DVD tray is ejected when you send a CD/DVD print

job and an error message appears on the LCD panel or PC screen,

follow the instructions on the LCD panel to clear the error.