Installation Instructions

92
The power light is on but nothing prints
Cause What to do
Your computer may not be
properly connected to the
printer.
Perform the setup procedure described in
the Setup sheet.
The interface cable may
not be plugged in securely.
Check both ends of the interface cable
between the printer and the computer.
You may not be using the
correct interface cable.
If you are using the USB interface, use a
Revision 1.1 cable.
Some error may have
occurred.
& See “Error/Warning Display” on page 79
Your printer may have
broken.
Print the nozzle check pattern to see if the
printer is broken.
& See “Running a printer operation check”
in the online Reference Guide
If the printer does not print, it may be
broken. Contact your dealer.
Your application software
is not properly set up for
your printer.
Make sure that the printer is selected in your
application software.
Your computer system’s
memory is too small to
handle the volume of data
in your document.
Try reducing the image resolution of your
document in the application software, or
install more memory in your computer if
you can.