Operation Manual

Printing with Mac OS X 203
3
3
3
3
3
3
3
3
3
3
3
3
English
Drying Time
per Print
Head Pass
Adds a waiting time when the print head reaches the end
of every pass.
Set this value using the slider or text box. To improve the
print quality by using slow ink absorption on the media,
set a higher value.
The drying time per print head pass can be set from 0 to
5 seconds, in 0.1 second increments.
Note:
If you use this feature, the printing time will be longer.
Paper Feed
Adjustment
Controls the paper feeding value, in 0.01% increments. If
the paper feeding value is too large, white horizontal
micro banding may appear. If the paper feeding value
is too small, dark horizontal micro banding may appear.
Paper
Thickness
This value automatically appears according to the media
for the Media Type setting. If you use non-Epson media,
modify this value for your media is recommended. Refer
to the paper specifications, or print "Thickness Pattern" to
find out the paper thickness.
Paper Suction Decreasing the air suction at the platen is useful to avoid
wrinkling or waving of thin or saturated media, or
eliminating vertical banding. The relationship of the
parameter and suction power is as follows.
Standard : 100%
-1: 50%
-2: 30%
-3: 10%
-4: 6%
Cut Method Determines the best cutting method according to the
paper thickness.
Standard: Normal speed and normal cut pressure
Thin Paper: Low cut pressure
Thick Paper, Fast:High speed and high cut pressure
Thick Paper, Slow:Low speed and high cut pressure
Mode Description