Operation Manual

212 Printing with Mac OS X
Performing Borderless Printing
When selecting the paper size with Borderless (Auto Expand),
Borderless (Auto Expand, Maximum), Borderless (Retain
Size), Borderless (Retain Size, Maximum), Roll Paper -
Borderless (Auto Expand), Roll Paper - Borderless (Retain
Size), or Roll Paper - Borderless Banner as the Paper Size in the
Page Setup dialog, Epson recommends the following media
conditions.
Accommodate media width:
Note:
❏ You cannot perform borderless printing on cut-sheet media with a
width of 420 mm (A2).
❏ When printing on roll paper with a width of 8 inches (203.2 inch)
or 420 mm (A2), attach the spacer to the spindle. See “Attaching
the spacer to the spindle” on page 267.
❏ If your application has margin settings, make sure they are set to
zero before printing.
❏ 8 inch, 203.2 mm
❏ 210 mm (A4)
❏ Letter (8.5 in), 215.9 mm
❏ 10 inch, 254 mm
❏ 257 mm
❏ 297 mm (A3)
❏ 300 mm
❏ 12 inch, 304.8 mm
❏ 329 mm (Super A3/B)
❏ 13 inch, 330.2 mm
❏ 14 inch, 355.6 mm
❏ 400 mm
❏ 16 inch, 406.4 mm
❏ 420 mm (A2)
❏ 17 inch, 431.8 mm