Operation Manual

224 The Control Panel
3Paper Source
button
Selects a paper source (Roll Auto Cut On
/Roll Auto Cut Off /Sheet )
Cuts the roll paper automatically after printing
if pressed and held for 3 seconds when Roll
Auto Cut On is selected.
Returns to the previous level when pressed in
the SelecType mode.
4Paper Feed
button
Feeds paper the in forward direction.
Ejects the cut-sheet paper when Sheet is
selected as the paper source.
Feeds the roll paper before cutting it when Roll
Auto Cut On setting is selected as the
paper source.
Loads a sheet from the paper tray to the
printing position automatically if Sheet is
selected as the paper source.
Selects a desired parameter from the selected
item if pressed in the SelecType mode.
Changes the parameters in forward order
when selecting a desired parameter in the
SelecType mode.
5Paper Feed
button
Feeds paper in the reverse direction as much
as the paper has been fed by using the Paper
Feed button .
Note:
If you have fed the paper forward by hand,
you cannot feed the paper in the reverse
direction by using this button.
Loads a sheet from the paper tray to the
printing position automatically if Sheet is
selected as the paper source.
Selects a desired parameter from the selected
item if pressed in the SelecType mode.
Changes the parameter in the reverse order
when selecting a desired parameter in the
SelecType mode.