Operation Manual

234 The Control Panel
Basic SelecType setting procedure
This section describes how to enter the SelecType mode and make
settings with the buttons on the control panel.
Note:
❏ Press the Pause
button whenever you want to exit the SelecType
mode and return to the READY status.
❏ Press the Paper Source button to return to the previous step.
1. Enter the SelecType mode
Make sure that READY appears on the LCD, and then press the
Menu
button. The first menu appears on the LCD.
2. Select a menu
Press the Paper Feed or Paper Feed button to select a
desired menu.
3. Set the menu
Press the Menu
button to set the selected menu. The first
item appears on the LCD.
4. Select an item
Press the Paper Feed or Paper Feed button to select a
desired item.
5. Set the item
Press the Menu
button to enter the selected item. The first
parameter appears on the LCD.
6. Select a parameter
Press the Paper Feed or Paper Feed button to select a
parameter for the item.