Operation Manual

236 The Control Panel
PLATEN GAP
You can adjust the distance between the print head and paper.
Normally, leave this set to STANDARD. If you find that printed
images are smeared, select WIDE or WIDER. Select NARROW for
printing on thin paper, or WIDEST for printing on thick paper.
PAGE LINE
You can select whether to print the page line (line along which to
cut off) on roll paper. Select ON if you want to print the page line,
or OFF otherwise.
This operation changes according to the Auto Cut settings.
Note:
When Sheet is selected as the paper source, this setting is not available.
Paper Source Print Page Line Printer’s Operation
Roll Auto Cut On On Prints a page line on the right
side only, and cuts paper
automatically after the print
job.
Roll Auto Cut On Off Does not print any page lines,
and cuts paper automatically
after the print job.
Roll Auto Cut Off On Prints page lines on the right
side and below the data, but
does not cut paper
automatically after the print
job.
Roll Auto Cut Off Off Does not print any page lines
and does not cut paper.