Operation Manual

The Control Panel 243
4
4
4
4
4
4
4
4
4
4
4
4
English
CUSTOM PAPER
This menu contains the following items. To make the paper
setting, see “Making the paper settings” on page 253.
PAPER NUMBER
When you select STANDARD, the printer determines paper
thickness automatically. You can also select No. X (X can be any
number between 1 to 10) to register the following settings or to
recall the following settings you have made.
Note:
If you select STANDARD, the printer prints data according to the driver
settings. If you select No. X, the control panel settings override the driver
settings unless you select AUTO in THICKNESS NUM.
PLATEN GAP
You can adjust the distance between the print head and paper.
Normally, leave this set to STANDARD. If you find that printed
images are smeared, select WIDE or WIDER. Select NARROW for
printing on thin paper, or WIDEST for printing on thick paper.
THICKNESS PAT
You can print the paper thickness detection pattern. If you select
STANDARD in PAPER NUMBER, the pattern is not printed.
❏ Platen gap
❏ Thickness pattern
❏ Thickness number
❏ Cut method
❏ Paper feed adjustment
❏ Eject roller type
❏ Drying time
❏ Suction
❏ MicroWeave adjustment