Operation Manual

The Control Panel 247
4
4
4
4
4
4
4
4
4
4
4
4
English
1. Make sure that paper is loaded in the printer.
2. Press the Menu
button to enter the SelecType mode.
3. Press the Paper Feed or Paper Feed button to display
TEST PRINT, and then press the Menu
button.
4. Press the Paper Feed or Paper Feed button to display
NOZZLE CHECK.
5. Press the Menu
button to display PRINT.
6. Press the Menu
button again to start printing a nozzle
check pattern.
After a nozzle check pattern is printed, the printer exits the
SelecType mode and returns to the READY status.
Nozzle check pattern examples:
If you find that any dots are missing from the test lines in the
pattern, you need to clean the print heads. Press the Menu
button for more than 3 seconds or access the Head Cleaning utility
software. For Windows, see “Cleaning the print head” on page
80. For Mac OS 9.x, see “Cleaning the print head” on page 165.
For Mac OS X, see “Cleaning the print head” on page 219.
good
head cleaning necessary