Operation Manual

256 The Control Panel
5. Press the Menu
button. If you select No. X, the number
you selected appears on the LCD.
6. Press the Pause
button to exit the SelecType mode.
Printing a status sheet
In the SelecType mode, you can print a status sheet to see the
current SelecType default values. To print a status sheet, follow
the steps below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu
button to enter the SelecType mode.
3. Press the Paper Feed or Paper Feed button to display
TEST PRINT, and then press the Menu
button.
4. Press the Paper Feed or Paper Feed button to display
STATUS CHECK, and then press the Menu
button.
5. Press the Menu
button again to start printing a status
sheet.
After printing is finished, the printer exits the SelecType mode
and returns to the READY status.
Setting the alert value of the paper
You can get a message when there is not much left, by setting the
alert value using the steps below.
Note:
This setting is available only when you select Roll Paper or Cut Sheet
for PAPER COUNTER in the Maintenance mode.